Filter
Top Products
English-22
SCHEDULE RESET Resets the following settings within the SCHEDULE menu back to factory setting: -
OFF TIMER, SCHEDULE SETTINGS.
KEEP PIP MODE Allows the monitor to remain in “PIP” and “TEXT TICKER” mode after powering off. OFF
When Power is returned, PIP and TEXT TICKER appear without having to enter the OSD.
PIP MODE Picture-in-Picture OFF
OFF OFF
PIP PIP
POP POP
SIDE BY SIDE (ASPECT)
SIDE BY SIDE ASPECT
SIDE BY SIDE (FULL) SIDE BY SIDE FULL
PIP SIZE Selects the size of the sub-picture used in Picture-in-Picture (PIP) mode. LARGE
SMALL
MIDDLE
LARGE
PIP POSITION Determines where the PIP appears on the screen. X = 95, Y = 92
ASPECT Selects sub picture aspect, [FULL], [NORMAL], [WIDE] and [ZOOM]. See page 17. FULL
TEXT TICKER Allow text insertion within main screen with the ability to adjust for direction, position, size, OFF
blend for transparency rate, detect and fade in. The TEXT TICKER and PIP functions cannot be
used simultaneouslly. If the PIP function is on, it will be deactivated and vice versa if the
TEXT TICKER is turned on.
SUB INPUT Selects sub picture input signal.
Depend on signal input
PIP RESET Resets PIP options back to factory settings except ASPECT and SUB INPUT. -
LANGUAGE Select the language used by the OSD. ENGLISH
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
SVENSKA
РУССКИЙ
OSD TURN OFF Turns off the OSD after a period of inactivity. The preset choices are 10-240 seconds. 30 Sec.
OSD POSITION Determines the location where the OSD appears on the screen.
X = 128, Y = 225
UP
DOWN
LEFT
RIGHT
INFORMATION OSD Selects whether the information OSD is displayed or not. The information OSD will be ON, 3 Sec.
displayed when the input signal or source changes. The information OSD will also give a
warning when there is no-signal or the signal is out-of range.
An interval between 3 to 10 seconds for the Information OSD to appear is available.
MONITOR INFORMATION Monitor Information. -
CARBON SAVINGS: Display the estimated carbon saving information in kg. The carbon
footprint factor in the carbon saving calculation is based on the OECD (2008 Edition).
PIP
OSD
(Depend on
destination)