NEC X461UN Flat Panel Television User Manual


 
English-23
English
OSD TRANSPARENCY Set the transparency level of the OSD. TYPE2
OFF
TYPE1
TYPE2
OSD ROTATION Determines the OSD display direction between landscape and portrait. LANDSCAPE
LANDSCAPE Display the OSD with landscape mode.
PORTRAIT Display the OSD with portrait mode.
INPUT NAME You can set currently displayed INPUT name as you like. Max: 8 letters, you can use -
Space, A-Z, 0-9, and some symbols.
CLOSED CAPTION Activates closed captioning (for U.S. only). OFF
OSD RESET Resets the following settings within the OSD menu back to factory setting: -
OSD TURN OFF, OSD POSITION, INFORMATION OSD, OSD TRANSPARENCY,
CLOSED CAPTION.
MONITOR ID Sets the monitor ID number from 1-100 and group ID from A-J. 1
NOTE: Group ID is made of multiple selections.
IR CONTROL Selects the mode of the monitor for use with the infra-red remote control when using the NORMAL
RS-232C daisy chain.
NORMAL The monitor will be controlled normally by wireless remote controller.
PRIMARY Choose “PRIMARY” for the first monitor within an RS-232C daisy chain.
SECONDARY Choose “SECONDARY” for all subsequent monitors within an RS-232C daisy chain.
LOCK Prevents the monitor from being controlled by wireless remote controller. To return to normal
operation, press the “DISPLAY” button on the remote controller for 5 seconds.
TILE MATRIX Allows one image to be expanded and displayed over multiple screens (up to 100) through a
distribution amplifier.
NOTE: Low resolution is not suitable for tiling to a large number of monitors.
H MONITORS Number of monitors arranged horizontally. 1
V MONITORS Number of monitors arranged vertically. 1
POSITION Select which section of the tiled image to be displayed on the monitor. 1
TILE COMP Turns the TILE COMP feature on. NO
ENABLE Enables Tile Matrix. NO
POWER ON DELAY Adjusts the delay time between being in “standby” mode and entering “power on” mode. 0 Sec.
“POWER ON DELAY” can be set between 0 and 50 seconds.
POWER INDICATOR Turns ON or OFF the LED located at the front of the monitor. ON
If “OFF” is selected, LED will not light when the LCD monitor is in active mode.
EXTERNAL CONTROL RS-232C
CONTROL Selects the control interface, RS-232C or LAN.
LAN RESET Resets the LAN settings.
SETTING COPY In daisy chain condition, set the OSD menu categories which copy from current monitor to NO
others. NOTE: When you use this function, EXTERNAL CONTROL should be “RS-232C”.
This function reset to default when power off. This function has limit up to about 5 monitors.
COPY START Select “YES” and press SET button to start copy.
ALL INPUT When you check this item, copy to all input teminals. Default is off.
MULTI DISPLAY RESET Resets “MULTI DISPLAY” options back to factory settings. -
MULTI DISPLAY