Filter
Top Products
12
Connecting to a TV, DVD player, VCR or camcorder (recording)
Connecting to a TV, DVD player, VCR or cam-
corder (recording)
Connect the A/V connectors (red, white, and yellow) of the A/V
cable to the corresponding output connectors on the cable box,
satellite receiver, VCR, DVD player, camcorder etc. Connect the
other end to the AV In socket at the back of the Recorder 2. Con-
nect the second A/V cable to the AV Out socket of the Recorder 2
and the corresponding input sockets on the TV as described in the
previous section.
Note: Most TVs do not have video output (only audio output). In
this case, you won't be able to record directly from the TV.
Instead, record TV shows from the cable box, satellite receiver
box, or PVR (like Tivo). If you don't have cable or satellite TV, you
can record from broadcast TV by plugging the video out from a
VCR into the A/V In on the Recorder 2, then plugging the A/V Out
from the Recorder 2 into the Video In on the TV.
I
N
O
U
T
ANTENNA IN
S-VIDEO
CHANNEL
34
I
N
MPEG-4 Video Recorder_UM_EN.book Page 12 Monday, June 19, 2006 8:22 PM