Filter
Top Products
ITEM# MM1007
Audio Setup
In the Audio Setup Menu option users can perform the actions shown in the
following image:
Speaker Setup
In the “Audio Setup Menu”, use the up and down keys to move the cursor
selecting the “Speaker Setup” option. Press “PLAY” key to enter into the “Speaker
Setup Menu” and then the user can make the following selections:
DOWNMIX Mode
In this menu the user can select the “LT/RT”, “Stereo”, “Simulated Circulation”
and “Off” options. When selecting “LT/RT” you have selected the right & left
audio channels (front) and Lo/Ro signal; “Stereo” means you have selected the
right & left audio channels (front) speaker to simulate a stereo audio effect; and
“Off” means the 5.1 channel output is selected (ie: no Downmix). After pressing
“PLAY” to ensure the option selection, press the left key to back out of the
“DOWNMIX” mode.
(Note) If the power amplifier is set for 2-channel signal input, it may select the
LT/RT mode to properly play the 2 channel input.
The Front Speaker
Select “Large/Small” for the front speaker.
The Middle Speaker
Under the “DOWNMIX” mode off condition, the user can select “Large / Small
/ Off” for the middle speaker.
21