Filter
Top Products
ITEM# MM1007
PCM Channel
Select “PCM channel” option in “SPDIF” menu page and select “SPDIF R/L”,
“SPDIF LS/RS” or “SPDIF C/LFE” options. The “SPDIF R/L” means to select
right or left stereo channel; the “SPDIF LS/RS” means to select right or left
circulation channel; and the “SPDIF C/LFE” means to select the medium and
heavy bass channel.
Dolby Digital Setup
Press “PLAY” at “Dolby code setup” option to enter into the menu; user can then
set up the “R+L dynamic range compression”.
R+L
In the “R+L” selection users can select the “Stereo”, “R-sound”, “L-sound” or
“Mix” option. In which “Stereo” means the output is a stereo signal; the “R-
sound” means the output is right audio signal; the “Left-sound” means the output
is left audio signal; and the “Mix” option means that system outputs the mean
signal of the Left and Right channels added together..
Dynamic Range Compression
In the “Dolby code setup” option page, select the “Dynamic range compression”
and press “PLAY” to make selections. Use up/down keys to select the compres
-
sion rate of the dynamic range. The higher compression range will make the
difference between the treble and bass less distinct.
Channel Delay Setup
In the “Delay” setup menu page users can set up the relative signal delay to each
of the speakers
Channel Trim
In the “Tone setup” menu page users can use up/down keys to move the curser
and select the “Balancer setup” option. After pressing “PLAY” users can then
enter the “Balancer setup” page to set up the “Balancer type”.
24