Filter
Top Products
11
SPECIFICATIONS
IR-CB2
IR system:
Works with practically all brands of IR remote
controls
Connections:
2 receiver inputs, 5 emitter outputs
Wiring requirements:
Category 5 or better
Home runs required from each IR receiver
Mounting:
Wall or flat surface: use drywall screws
Dimensions:
5-11/16" wide x 1-1/4" high x 2" deep
Power requirements:
110V to 12V DC power supply (included)
Warranty: 2 year limited
IR-SMR
IR system:
Works with practically all brands of IR remote
controls
IR receiving (varies by brand of remote control):
18'-30' range
From 20', 30 degrees off-axis
Wiring requirements:
Category 5 or better, home runs required
Mounting:
Self-adhesive, surface mount
Dimensions:
2" long x 1/2" wide x 1/4" high
Warranty: 2 year limited