Filter
Top Products
4
PACKAGE CONTENTS
■ IR-CB2 x 1
■ Snap and Lock Connectors x 2
■ In-line power supply x 1
■ Self-adhesive rubber feet x 4
■ IR-SMR Receiver x 1
■ Adhesive-backed strip for mounting x 1
■ IR-E1 Emitters x 5
■ IR Blocking Covers x 5
■ Extra emitter adhesive strips x 10
PREPARING FOR INSTALLATION
The IR Receiver cables, emitter cables and the 12V
DC power supply cable must all reach the proposed
location of the IR-CB2 Connecting Block. Mark the
cables with wire labels, describing where the cables
originate from, rather than where they will terminate.
Locate a local un-switched AC outlet to be used to
power the IR-CB2 power supply.
Tools Required
■ 1/8" Slotted screwdriver
■ Wire labels
■ Wire stripper