Filter
Top Products
GB 3
Mediamaster
Contents
Remote control 4
Front and rear panel 5
Connecting the Mediamaster 6
About the SCART socket 6
Preparing the remote control 6
About digital transmission 6
Connecting to the TV aerial 7
Common connections 8
Connecting to the TV with SCART 8
Connecting to the TV without SCART 8
Connecting a VCR with SCART 9
Connecting a VCR without SCART 9
First-time installation 10
General information 10
Switching on the first time and start 10
Watching TV & listening to Radio 11
General Information 11
Programme information 11
Temporary settings 12
External equipment 12
Teletext 13
Navi Bars 18
Navi Bars 14
Navigating with Navi Bars 14
The Settings folder 15
The User preferences folder 15
TV folder 16
Edit lists folder 17
Search folder 19
Access folder 20
Maintenance folder 21
Technical specifications 22
Nokia Mediamaster software end-user
license 23
Read this before using the Mediamaster
• Do not use any other power supply than the original unit delivered with the
Mediamaster.
• Allow 10 cm of space around the Mediamaster for sufficient ventilation.
• Do not cover the Mediamaster's ventilation openings with items such as
newspapers, tablecloths, curtains, etc.
• Do not place the Mediamaster on top of a heat-emitting unit.
• Do not place naked flame sources, such as lit candles, on the Mediamaster.
• Use a soft cloth and a mild solution of washing-up liquid to clean the casing.
• Do not expose the Mediamaster to dripping or splashing liquids.
• Do not place any objects filled with liquids, such as vases, on the Mediamaster.
• To give your Mediamaster extra protection, e.g., during a thunderstorm, we
recommend that you connect it via an external surge protection device.
• Do not connect or modify cables when the Mediamaster is plugged in.
• Do not remove the cover.
• Do not allow the unit to be exposed to hot, cold or humid conditions.
• Service should only be carried out at a Nokia Authorised Service Centre.
• Please note that the only way to isolate the Mediamaster completely from the
mains supply is to unplug the power supply!