Filter
Top Products
GB 3
Mediamaster 112 T & 120 T
Contents
Remote control 4
Connecting the Mediamaster 5
Front and Rear panel 5
Preparing the remote control 5
Common Connections 6
Connecting to the TV with SCART 6
Connecting to the TV without SCART 6
Connecting a Video recorder with SCART 7
Connecting a Video recorder without SCART 7
About Smart card 8
About digital transmission 8
Connecting to the TV aerial 8
First-time installation 10
Switching on for the first time and start 10
Watching TV & listening to the radio 11
Programme information 11
Temporary settings 12
Programme Guide: EPG 12
External equipment 13
Sorting channels 13
Teletext 14
Navi Bars 15
Navigating with Navi Bars 15
The Settings folder 15
The User folder 16
The TV folder 16
Edit lists folder 18
Search folder 20
Access folder 21
Maintenance folder 22
CA menu 23
Channel info 23
End-user license 24
Technical specifications 25
Read this before using the Mediamaster
• Do not use any power supply other than the original unit delivered with the
Mediamaster.
• Allow 10 cm of space around the Mediamaster for sufficient ventilation.
• Do not cover the Mediamaster's ventilation openings with items such as news-
papers, tablecloths, curtains, etc.
• Do not place the Mediamaster on top of a heat-emitting unit.
• Do not place naked flame sources, such as lit candles, on the Mediamaster.
• Use a soft cloth and a mild solution of washing-up liquid to clean the casing.
• Do not expose the Mediamaster to dripping or splashing liquids.
• Do not place any objects filled with liquids, such as vases, on the Mediamaster.
• To give your Mediamaster extra protection, e.g. during a thunderstorm, we
recommend that you connect it via an external surge protection device.
• Do not connect or modify cables when the Mediamaster is plugged in.
• Do not remove the cover.
• Do not allow the unit to be exposed to hot, cold or humid conditions.
• Service should only be carried out at a Nokia Authorised Service Centre.
• Please note that the only way to isolate the Mediamaster completely from
the mains supply is to unplug the power supply!