GB 23
NAVI BARS
Settings folder ☛ Channel
This menu is used when you want to search for channels at a later time. To open
it, you will be asked to enter your access code.
The access code is set to 1234 at the factory.
A channel search procedure can be performed in three different ways: Automatic,
Manual or Advanced manual search.
Automatic search
•Highlight the line and press select to start searching for channels.
Manual search
When you perform a manual search, you must enter some parameters for the chan-
nel search to work.
The information you need to enter in this menu should be supplied by your Serv-
ice provider.
Channel: Select the channel you want to search for.
Network search: Select “Yes” if you want to search on all the transmitters con-
nected to a specific network.
•Press select to start searching for channels.
Advanced manual search
The information you need to enter in this menu should be supplied by your Serv-
ice provider.
You can use this menu if you are looking for a “specific” channel, i.e., non-DVB
standard channels, which can be easier to find when you have entered the neces-
sary PID settings here.
Channel: Select the channel you want to search for.
PID Video: Enter the PID (Packet Identifier) for the video signal.
PID Audio: Enter the PID for the audio signal.
PID PCR: Enter the PID for the PCR (Programme Clock Reference).
•Press select to search with the specified values.
All channels created with the advanced manual search will get an automatically
generated name, e.g., P0001 for the first channel, P0002 for the second, etc.
•Press select to save the new channel or back to cancel.