Filter
Top Products
25
AV1AV2
RECORDER
OUT IN
CABLE
OUT IN
1
4
2
5 3
AV2 :
L + R + VIDEO
AV1 :
L + R + VIDEO
ANTENNA
75
& Connect the RF antenna cable 1 of the RF IN socket of your other AV device.
é Connect the RF output of the AV device to the RF input of the recorder 2.
“ Connect another RF cable 4 from the output OUT of your recorder to the TV’s input 75 Ohm x jack.
‘ To obtain better picture quality, also connect the Video or S-Video,Audio left and Audio right cables of both devices to AV1
(VIDEO or S-VIDEO, AUDIO L and R,) 3 and to AV2 (VIDEO or S-VIDEO, AUDIO L and R) 5.
Notes:
- In case of mono equipment, only the left loudspeaker reproduces sound. Use a mono to stereo adaptor (not supplied) for sound reproduction
via all internal loudspeakers.
- When using the
S-VIDEO connector do not connect any device to the AV2 VIDEO or AV1 VIDEO input.
Recorder and other equipment
CABLE
RF IN
RECORDER
OUTIN
VIDEO
L/Mono
R
6
The
MONITOR OUT
connector can be used for a daisy chaining or to
record programs from your TV 6. Only when a recorder is connected to
MONITOR OUT it is possible to record an analog program from your TV.
See Record with your recorder, p. 30.