Filter
Top Products
26
DVD Player or other accessory digital source equipment
Devices with Component Video Output Connectors (YPbPr)
This TV is capable of displaying 1080i,720p, 576p and 480p DTV signals
when connected to a DTV tuner Set Top Box. Select the output of the Set
Top Box to either 1080i, 720p,576p or 480p.A DTV signal must be
available in your area.
& Connect the three separate component video cables 1 to the device
having component video outputs (YPbPr), such as Set Top Boxes, DVD-
players, laser-disc players, videogame players, satellite receivers or other
equipment, and to the
Y, Pb and Pr jacks of AV1 or AV3 on the TV.
• Connect to the Y, Pb and Pr jacks of AV1 in case of devices with analog
audio signals.
• Connect to the
Y, Pb and Pr jacks of AV3 in case of devices with digital
audio signals.
é In case of a device with digital audio,connect the audio cable 2 to the
DIGITAL AUDIO OUT of the device and to the DIG.AUDIO IN of the TV
or to your Home Cinema system.
In case of a device with analog audio, connect the audio cable to the
device’s
AUDIO L and R 3 jacks and the L and R audio jacks of AV1.
Devices with RGB output
& Connect the device with RGB output with separate Horizontal and Vertical
sync to the
Pr/R Pb/B Y/G input 1 jacks and to the H and V jacks of AV1
2.
é Connect the audio cables to the L and R AUDIO jacks of AV1 3.
Devices with an S-Video connector
& Connect an S-Video cable to the AV1 or AV2 S-VIDEO input 1.
Note:When using the
S-VIDEO connector do not connect any device to the AV2
VIDEO or AV1 VIDEO input that you are using.
é Connect the audio cables to the device’s AUDIO L and R jacks and to the
L and R audioAV1 or AV2 jacks 2 on the TV accordingly to where you
connected the S-Video cable.
Notes
- If necessary, you can adjust the picture position to the center of the screen with the
cursor keys.
- The labels for the component video sockets may differ depending on the DVD
player or the device connected.Although the abbreviations may vary, the letters B
and R stand for the blue and red component signals, respectively, and Y indicates
the luminance signal. Refer to the DVD player’s or devices instructions for use for
definitions and connection details.
- This television is designed to accept high definition signal standards 480p, 576p,
720p and 1080i as specified by the Electronic Industries Association standard
EIA770.3.
Digital devices from different manufacturers have the possibility of differing output
standards which may cause difficulties for the television to properly display.
-Due to possible digital image distortion when displaying signals from connected
digital equipment, automatically the Auto picture setting
Soft is selected, if you
selected Digital STB in the Source menu. See Picture menu,Auto picture, p. 19.
Changing this setting during reviewing will not be stored as
Personal setting after
switch off.
Warning: in case you notice scrolling images, wrong colors or no color, no picture, or
even combinations of these on your screen, check if the connections are done in the
correct way or move your digital device further away from your TV.
DVD / STB
AV1/AV2 :
L + R
AV1/AV2 :
S-VIDEO
AV1
AV2
1 2
DVD / STB
AV1
2
1
AUDIO
L + R
YPbPr H + V
3
DVD / STB
AV1AV3
1 13
AUDIO
L + R
IN2
IN1
YPbPr YPbPr
2
DIGITAL AUDIO