Filter
Top Products
25
Resetting the Recorder (CLEAR)
This function erases all files stored in the recorder and also resets the current time and other settings
to their initial status. If you have important files that you want to save, connect the recorder to a
computer and transfer those files from the recorder to the computer before resetting the device.
1
While holding the STOP button, hold the
ERASE button for 2 seconds or longer.
“CLEAR” and “YES” appear alternately on the
display for 8 seconds.
2
Press the ERASE button again.
The recorder returns to the default condition at
the time of purchase, and shows the date and
time setting screen (☞ P.8).
....................................................................................................................
Note
If the ERASE button is not pressed within the 8 seconds after “CLEAR” starts
flashing, the recorder will revert to stop status.
1
2
Hold
Setting the HOLD switch to the HOLD position.
If you set the recorder to HOLD position by sliding the HOLD switch in the direction of the arrow,
the current conditions will be preserved, and all buttons and switches except the HOLD switch
will be disabled. This feature is useful when the recorder has to be carried a bag or a pocket
because files won't be erased if the ERASE button is pressed by accident.
Remember to reset the HOLD switch when using the recorder.
Notes
• The recorder functions as follows with the HOLD switch set to the HOLD position:
–If the recorder is stopped, the display goes dark.
–If the recorder is playing, the display goes dark when playback of the
current file has completed.
–If the recorder is recording, the display goes dark when the recorder
stops recording automatically upon running out of free memory.
• When the display is dark because the HOLD switch is set to the HOLD position,
you can make the clock flash for 2 seconds by pressing any button.
• When you set the HOLD switch to the HOLD position while playing back,
you can still adjust the volume using the VOLUME control.
• The alarm will sound at the scheduled time even if the recorder is set to
HOLD. The recorder will then begin to play the file associated with the
alarm once you press the STOP button.
Resetting the Recorder (CLEAR) / Hold