Filter
Top Products
15
Step 8
11
M-A – M-L
M-A – M-L
10
10
Note: IF MONITOR SCREWS “BOTTOM OUT”, THEN USE ADDITIONAL WASHERS
(not included) TO TAKE UP THE SLACK.
TV
Attach the Universal Adapter to the TV:
• Place the TV face down on a protected surface.
• For larger TV’s, the vertical rails may need swapped out for the longer included
rails. Rails are swapped by removing 2 Phillips screws per rail.
• Use the self center function of the adapter to line up the TV’s mounting holes
with the slots in the vertical rails. Connect the TV to the adapter using the
correct screws (M-A – M-L) and square washers (U). Spacers (M-M and M-N)
may be needed if the TV has recessed mounting holes or if inputs are
obstructed by the mount. IF SPACERS ARE REQUIRED, THE INSIDE
DIMENISIONS OF THE ENCLOSURE MUST ACCOMMODATE THIS NEED!
• DO NOT OVERTIGHTEN HARDWARE, DAMAGE TO THE TV MAY RESULT.