Filter
Top Products
6
Before Enclosure Construction!
Assemble lift mechanism and connect the TV to be used in the
install to determine dimensions for the lift enclosure prior to
construction. Be sure to leave room for adjustments If
necessary. An out of cabinet assembly of the mechanism can
be done using steps 1,4,6,8,9 and 10 in order.
(H + 2”)
(D + 2”)
(W + 2”)
(H)
(D)
(W)
(H) Minimum Height
Height of lift in closed
position or Height of TV + 2”
NOTE:
For use with the
longer rails spacers will be
needed above and below the
lift mechanism
(D) Minimum Depth
Depth of TV + Depth of
Mount + 2”
Be very careful not to build
the enclosure too shallow.
The mount may not function
or damage to the TV could
occur
(W) Minimum Width
Width of TV + 2”
This will allow 1 “ of clearance on either
side of the television.
Minimum INTERIOR Dimensions