Filter
Top Products
11
Volume/Mute Control and Punch-
Through
This remote lets you select which device Mode
controls your Volume/Mute buttons. The remote is
initially set for all device Modes to use their own
Volume/Mute control if present. If the programmed
code has no Volume/Mute operation of its own
then those buttons will punch-through control to
the TV Mode device without needing to change to
TV Mode.
Setting ALL Volume/Mute Control to
any one Mode
This routine can set all Modes to “punch-through”
to any one chosen Mode for Volume/Mute button
control without the needing to change to that
Mode.
1. Press and hold the SETUP button
until the red indicator turns on,
then release the button.
2. Press and hold the MUTE button
until the red indicator blinks off,
then release the button.
3. Press and release the desired
Mode button (TV, DVR, etc.) for
Volume/Mute control, the red
indicator blinks then stays on.
4. Press and release the MUTE
button and the red indicator turns
off. The red indicator will blink
rapidly for three seconds if the
Mode you have selected has no
Volume/Mute control.
All other Modes will now punch-through to your
chosen Mode for Volume/Mute control.
Using Your Remote, cont.