Filter
Top Products
12
Using Your Remote, cont.
Setting any Mode to use its own
Volume/Mute Control
This routine can set any Mode to use only its own
Volume/Mute control. Note - If your chosen Mode
has no Volume/Mute functions of its own then the
Volume/Mute buttons will do nothing.
1. Press and hold the SETUP button
until the red indicator turns on,
then release the button.
2. Press and hold the MUTE button
until the red indicator blinks off,
then release the button.
3. Press and release the desired
Mode button (TV, DVR, etc.), the
red indicator blinks then stays on.
4. Press and release the VOL-
button, the red indicator blinks
then stays on.
5. Press and release the MUTE
button and the red indicator turns
off.
Your chosen Mode will now use its
own Volume/Mute control.