Filter
Top Products
10 WWW.ONEFORALL.COM
O
nce you have Set-Up your ONE FOR ALL 2, you can blink back your
SET-UP CODE for future reference.
Example: To blink out your Television code:
1 Press TV once.
2
Press and hold down the MAGIC key
(
for approximately 3 seconds) until the
red LED (underneath the TV key
in this example) blinks twice.
The red LED will blink once, then twice.
3 Press 9 9 0. The red LED underneath the TV key will blink
twice.
4 For the first digit of your four-digit code, press 1 and
count all the red blinks.
5 For the second digit, press 2 and count all the red blinks.
6 For the third digit, press 3 and count all the red blinks.
7 For the fourth digit, press 4 and count all the red blinks.
Now you have your four-digit code.
- If there are no blinks, the digit is "0".
- If you are not sure how many times it blinked, simply press
the corresponding digit again to repeat the blink-back.
Code Blink out
(
To find out which code is currently programmed)
Quick Code Reference
Device Type Code
1.__________________________________
2.__________________________________
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
x2