Filter
Top Products
WWW.ONEFORALL.COM 9
--> If your device does not respond to the ONE FOR ALL 2 after you
have tried all the codes listed for your brand.
-
-> The Search Method may also work if your brand is not listed at
all.
The Search Method allows you to find the code for your device by scanning
t
hrough all the codes contained in the memory of the ONE FOR ALL 2.
Example: To search for your TV code:
1
Switch on your television (not on standby) and aim your ONE FOR ALL
at your TV.
2 Press the TV key on your ONE FOR ALL 2.
3 Press and hold down the MAGIC key
(for appraximately 3 seconds) until the
red LED (underneath the TV key
in this example) blinks twice.
The red LED will blink once, then twice.
4 Press 9 9 1. The red LED will blink twice.
5 Next, press OFF.
- If you wish you may also search for your code using
another function than “OFF”. Simply choose between 0,
1, 2, 3, VOL+, PLAY, STOP or MUTE instead.
6 Aim the ONE FOR ALL 2 at your Device. Now press CH+
over and over, until your e.g. Television switches off.
- Everytime you press the CH+ key the ONE FOR ALL 2 will
send out a POWER signal (the function you chose at step
5) from the next code contained in the memory.
- You may have to press this key many times (up to 150
times) so please be patient.
- If you skip past a code, you can go to the previous
code(s) by pressing the CH- key.
- Remember to keep pointing the ONE FOR ALL 2 at your
Device while pressing this key.
7 As soon as your Device switches off, press the MAGIC
key to store the code.
- If your Device does not switch on pressing the ON key,
simply press the OFF key, a number key or CH+ to switch your e.g.
Television back on.
Search Method
x2