Filter
Top Products
WWW.ONEFORALL.COM 17
Trouble-Shooting
Problem:
Y
our brand is not listed
i
n the code section?
T
he ONE FOR ALL does
not operate your
d
evice(s)?
The ONE FOR ALL is not
performing commands
properly?
Problems changing
channels?
Video not recording?
The ONE FOR ALL does
not respond after
pressing a key?
The device key does not
blink when you press
a key?
Solution:
T
ry the search method on page 7.
A
) Try all the codes listed for your brand.
B) Try the search method on page 7.
You may be using the wrong
code. Try repeating the Direct
Set-Up using another code listed
under your brand or start the
search method over again to
locate the proper code.
Enter the channel number
exactly as you would on your
original remote.
As a safety feature on your
ONE FOR ALL, you must press
the Record key twice.
Make sure you are using new
batteries and are aiming the
ONE FOR ALL at your device.
Replace batteries with 4 fresh,
new AAA/LR03” alkaline batteries.
D
epending on the functions of your original remote control, the ONE FOR ALL
m
ay operate the colour and brightness settings of your television.
Colour (+) = Press and release MAGIC then hold Volume (+)
C
olour (-) = Press and release MAGIC then hold Volume (-)
B
rightness (+) = Press and release MAGIC then hold Channel (+)
B
rightness (-) = Press and release MAGIC then hold Channel (-)
Colour and Brightness
Extra Features
706155_URC7556_SCAND_10t:Ofa5_Digital_URC7555_SCAND_10_Talen 04-12-2007 16:47 Pagina 17