Filter
Top Products
8 WWW.ONEFORAL L.COM
Once you have Set-Up your ONE FOR ALL 2, you can blink back your
Set-up Code for future reference.
Example: to blink out your television code:
1. Press the TV key once.
2. Press and hold down MAGIC until the ONE FOR ALL
2 red light blinks twice (the red light will blink once
then twice).
3. Press 9 9 0. The red light will blink twice.
4. For the first digit of your four-digit code, press 1 and
count all the red blinks. If there are no blinks, the
digit is „0“.
5. For the second digit of your four-digit code, press 2
and count all the red blinks. If there are no blinks,
the digit is „0“.
6. For the third digit of your four-digit code, press 3
and count all the red blinks. If there are no blinks,
the digit is „0“.
7. For the fourth digit of your four-digit code, press 4
and count all the red blinks. If there are no blinks,
the digit is „0“. Now you have your four-digit
code.
Code blink out
(To find out which code is currently programmed)
- To blink back the code for your other devices, press the appropriate
device key during step 1.
Device Type
1 ……………………………………
2 ……………………………………
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Quick Code Reference
Make sure you write down the codes for your devices in the
boxes below and in the battery compartment for future easy
reference.
705006_URC-7721_E-10:URC-7720 TANGO 2 7 NEW_’05 27-02-2007 12:19 Pagina 8