One for All URC 4063 Universal Remote User Manual


 
Feature Function
The Red Light (LED) flashes red to
show that the remote is working.
The SETUP key is used to program
your
One For All
®
Easy 4
.
The GLOW keys: VOL +/- (Volume Up
and Down), CH +/- (Channel Up and
Down), M (Mute), POWER, TV/VCR,
ENTER and the Digit Keys (0-9)
operate the same as on your original
remote. These keys are made of a
phosphorescent material that
Glows-in-the-dark. To activate the
“GLOW” Feature, you must expose
the GLOW Keys to bright light. The
length of time the GLOW Keys
remain illuminated will be deter-
mined by the length of time the
remote is exposed to bright light.
The TV, VCR/LD, CBL/SAT, and AUDIO
keys are used to select the home
entertainment component you want
to control.
The MENU key operates the same as
the MENU or OSD (On Screen
Display) key on your original remote.
When you press the MENU key, your
One For All
®
Remote Control enters
the menu mode and enables the
CH +/- and VOL +/- keys to navigate
through your menu. Pressing one of
the device keys will exit the remote
control’s menu mode and revert CH
+/- and VOL +/- to their original
functions. If your original remote
control had a SELECT key, for use in
your menu, try M (Mute) or ENTER.
Please consult the original owners
manual of your home entertainment
component for more detailed
instructions on accessing and
navigating your on-screen menus.
The FAV CH (Favorite Channel) key
allows you to program your
One For
All
®
Easy 4
with up to 10 of your
favorite channels.
The PREV CH (Previous Channel) key
operates the same as the LAST
CHANNEL or RECALL key on your
original remote.
The REC (Record), PAUSE, REW
(Rewind), PLAY, FF (Fast Forward), and
STOP keys operate the same as the
keys on your original VCR and CD
Player remote. As a safety feature
on the
One For All
®
Easy 4
, you must
press the REC key twice.
Features and Functions
The illustration below and the chart immediately
after describe the features and functions of the
One For All
®
Easy 4
universal remote control. Use
the drawing to locate each key on the remote,
then refer to the chart for a description of the
corresponding function each key performs.
SETUP
TV VCR/LD
CBL/SAT AUDIO
MENU
Overview
SETUP
CBL/SAT
AUDIO MENU
MENU +
TV
VCR/LD
POWER
CH
+
CH
_
VOL VOL
M
REC
ENTER TV/VCR
MENU –
PREV CH
FAV CH
MENU
L
MENU
R
PAUSE
PLAY
REW FF
STOP
S
E
L
E
C
T
Thank you for purchasing the
One For All
®
Easy 4
universal remote control. Before you can use
your new remote, you will need to program it to
operate the specific home entertainment
components you wish to control. Follow the
instructions detailed in this manual to set up your
One For All
®
Easy 4
and enjoy your new remote
control.
M
S
E
L
E
C
T
ENTER
FAV CH
PREV CH
0- 9
0- 9
REC
PAUSE
STOP
REW
PLAY
FF
1
2
Installing the Batteries
Your
One For All
®
Easy 4
requires four (4) new AAA alkaline
batteries. To install the batteries:
On the back of the
One For All
®
Easy 4
,
push down on the tab and lift the battery
cover off.
Match the + and - marks on the batteries
to the + and - marks in the battery case,
then insert the batteries.
Press the battery cover back into place.
Test the unit by pressing POWER. If the
batteries are inserted correctly, the red light
(LED) will blink once.
NOTE: Removing the batteries for more than 15 minutes will
require you to reprogram your remote.
POWER
3
4
Setting Up Your Components
Programming the
One For All
®
Easy 4
to operate
your TV:
Locate the brand name of your TV and then write
it in the space below.
TV Brand: ______________________________________
Locate the brand name of your TV in the “SETUP
CODES FOR TVs” section. The brands are listed in
alphabetical order with the most popular codes
listed first. You will use one of these codes to
program your One For All Easy 4 to operate your TV.
To program the One For All Easy 4 to operate your
TV:
1 Turn on your TV.
2 Press TV and release. Press and hold
SETUP until the
One For All
®
Easy 4’s
red
light blinks twice, then release SETUP.
3 Enter the first three-digit TV code listed
for your brand in the “Set-Up Codes for
TVs” section. If you perform this
procedure correctly, the red light will
blink twice when you enter the final
digit of your code.
4 Aim the
One For All
®
Easy 4
at your TV
and press POWER. Your TV should turn
off. If your TV does not respond, repeat
Steps 2-4, trying each code listed for
your brand until you find the one that
operates your TV.
5 Your
One For All
®
Easy 4
is now
programmed to operate your TV. Write
your TV code in the boxes to the left for
future reference.
Remember, if you want to use your
One For All
®
Easy 4
to operate your TV, press the TV key first.
Set-Up Codes for TVs
TV SETUP
STOP
SEE
BELOW
DO NOT USE the MENU- key on your
One For All
®
Easy 4
remote control with TVs manufactured
by Mitsubishi in 1996 or 1997, or on any TV manufactured in 1996 or 1997 using TV code 150. In
1996, Mitsubishi changed the frequency used to operate the menu down feature on these TVs.
Consequently, using the MENU- key on your
One For All
®
Easy 4 remote control
with these
Mitsubishi TVs or with TVs using TV Code 150 will put your TV in a service mode. Universal
Electronics Inc. assumes no responsibility for this change in the manufacturer’s design or for any
damage to your TV or any other damages that you incur as a result of these changes.
Attention Consumers
STOP
POWER
VOL
VOL
CH
+
CH
_
TV/VCR
A-Mark 003
Admiral 093, 016, 180,
165, 179
Adventura 046
Aiko 092
Akai 030, 056, 145,
151
Alleron 179
Ambassador 177
Amstrad 171, 177
Anam 180
Anam
National 055
AOC 030, 019, 185, 137,
003, 180, 056
Archer 003
Audiovox 180, 003
Belcor 019, 030
Bell &
Howell 016, 154, 179, 180
Blue Star 282
BPL 282
Bradford 180
User Manual
Previous Model Name:
Big Easy Select
URC 4063
Easy 4