Filter
Top Products
highlighted with an asterisk (*), you may need to
program a separate TV code in order to control
the volume. Check the list of codes below and
follow the instructions detailed in the
“Programming the One For All Easy 4 to Operate
Your TV” section to program the supplied TV code.
TV/VCRs working on VCR code 035 may require TV
code 051 for volume control.
TV/VCRs working on VCR code 048 may require TV
code 093 for volume control.
TV/VCRs working on VCR code 060 may require TV
code 047 for volume control.
TV/VCRs working on VCR code 081 may require TV
code 054 for volume control.
TV/VCRs working on VCR code 162 may require TV
code 250 for volume control.
Programming the One For All
®
Easy 4 to operate
your Cable Converter or DBS Satellite:
Allegro 153, 315
Antronix 022
Archer 022, 153
Belcor 056
Cable Star 056
Cabletenna 022
Cableview 022
Century 153
Citizen 153, 315
Colour Voice 025
Comtronics 040
Contec 019
Eastern 002
Everquest 015, 040
Focus 400
GC
Electronics 056
Garrard 153
Gemini 015
General
Instruments 011, 476
Goldstar 040, 144
Hamlin 009, 020, 034,
259
Hitachi 011
Hytex 007
Jasco 153, 315
Jerrold 003, 011, 012,
014, 015, 476
Movie Time 063, 156
NSC 063, 156
Novaplex 618
Oak 007, 019
Optimus 021
Panasonic 021, 107
Philips 025, 153
Pioneer 144
Popular
Mechanics 400
RCA 021
RadioShack 015, 315
Recoton 400
Regal 020, 259
Regency 002
Rembrandt 011
SL Marx 040
Samsung 040, 144
Scientific
Atlanta 008, 017, 477
Signal 015, 040
Signature 011
Sprucer 021
Starcom 003, 015
Stargate 015, 040
Starquest 015
Sylvania 001
TV86 063
Tandy 258
Teleview 040
Texscan 001
Tocom 012, 013
Tusa 015
Unika 022, 153
United Artists 007
United Cable 003
Universal 022, 056, 153
Videoway 250
Viewstar 063, 258
Zenith 525
Zentek 400
Set-Up Codes for Satellites
Channel
Master 018
Chaparral 053
Citoh 164
Drake 018, 064
Echostar 775, 269, 280
ExpressVu 775
General
Instruments 547, 038, 050,
361
HTS 775
Homecable 238
Hughes
Network
Systems 749
IQ 210
Janeil 152
Jerrold 361, 627
Legend 269
Macom 018, 050
Memorex 269
Panasonic 152, 701
Primestar 627, 361
RCA 566
Realistic 052
STS 210
Programming the
One
For All
®
Easy 4
to
operate your CD
Player:
Locate the brand
Locate the brand name of your Cable Converter
or Satellite and then write it in the space below.
Cable or Satellite Brand: _______________________
Locate the brand name of your Cable Converter
or Satellite in the “SETUP CODES FOR CABLE
CONVERTERS” or “SETUP CODES FOR SATELLITES”
section. The brands are listed in alphabetical order
with the most popular codes listed first. You will
use one of these codes to program your One For
All Easy 4 to operate your Cable Converter or
Satellite.
To program the One For All Easy 4 to operate your
Cable Converter or Satellite:
1 Turn on your Cable Box, Satellite or DSS.
2 Press CBL/SAT and release. Press and
hold SETUP until the
One For All
®
Easy 4’s
red light blinks twice, then release SETUP.
3 Enter the first three-digit Cable Box,
Satellite or DSS code you wrote down in
the “Looking Up Set-Up Codes for Your
Components” section. If you perform
this procedure correctly, the red light
will blink twice.
4 Aim the
One For All
®
Easy 4
at your
Cable Box, Satellite or DSS and press
POWER. Your Cable Box, Satellite or DSS
should turn off. If your Cable Box,
Satellite or DSS does not respond,
repeat Steps 2-4, trying each code
listed for your brand until you find the
one that operates your Cable Box,
Satellite or DSS.
5 Your
One For All
®
Easy 4
is now
programmed to operate your Cable
Box, Satellite, or DSS. Write your Cable
Box, Satellite, or DSS code in the boxes
to the left for future reference.
NOTE: If your original Cable Box remote control did
not have an “ON” key, press CH+ on the
One For
All
®
Easy 4
to turn your Cable Box ON.
Set-Up Codes for Cable Converters
ABC 001, 003, 007, 008, 011, 013, 014, 017
CBL/SAT
SETUP
POWER
Set-Up Codes for
Laser Discs
Carver 194
Disco Vision 023
Hitachi 023
Magnavox 194
Marantz 194
Mitsubishi 059
NAD 059
Panasonic 204
Philips 194
Pioneer 059, 023
Quasar 204
Sega 023
Sony 201
Theta Digital 194
name of your CD Player and then write it in the
space below.
CD Player Brand: _____________________________
Locate the brand name of your CD Player in the
“SETUP CODES FOR CD PLAYERS” section. The
brands are listed in alphabetical order with the
most popular codes listed first. You will use one of
these codes to program your One For All Easy 4 to
operate your CD Player.
To program the One For All Easy 4 to operate your
CD Player:
1 Turn on your CD Player and insert a
compact disc.
2 Press AUDIO and release. Press and
hold SETUP until the
One For All
®
Easy
4’s
red light blinks twice, then release
SETUP.
3 Enter the first three-digit CD Player
code you wrote down in the “Looking
Up Set-Up Codes for Your Compo-
nents” section. If you perform this
procedure correctly, the red light will
blink twice.
4 Aim the
One For All
®
Easy 4
at your CD
Player and press PLAY. Your CD Player
should play your disc. If your CD Player
does not respond, repeat Steps 2-4,
trying each code listed for your brand
until you find the one that operates
your CD Player.
5 Your
One For All
®
Easy 4
is now
programmed to operate your CD
Player. Write your CD Player code in
AUDIO
SETUP
PLAY
the boxes to the left for future
reference.
Remember, if you want to use your
One For All
®
Easy 4
to operate your CD Player, press the AUDIO
key first.
Set-Up Codes for
CD Players
Aiwa 124, 157
California
Audio Lab 029
Carver 57, 179
DKK 000
Denon 003
Emerson 305
Fisher 048, 088, 179
Garrard 393
Genexxa 032, 305
Hitachi 032
JVC 072
Kenwood 028, 037, 048,
190
Krell 157
LXI 305
Linn 157
MCS 029
Magnavox 157, 305
Marantz 029, 157
Mission 157
NSM 157
Onkyo 101
Optimus 000, 032, 037,
048, 145, 179,
305, 468
Panasonic 029
Philips 157
Pioneer 032, 305, 468
Proton 157
QED 157
Quasar 029
RCA 053, 179, 305
Realistic 179
Rotel 157
SAE 157
Sansui 157, 305
Sanyo 179
Scott 305
Sears 305
Sharp 037
Sony 000, 185, 490,
604, 605
Soundesign 145
TEAC 393
Technics 029, 303
Victor 072
Wards 157
Yamaha 036, 187
Reassigning Device Keys
You can use the
One For All
®
Easy 4
to operate a
second TV or a second VCR or any combination of
four home entertainment components. For
example, you may want your
One For All
®
Easy 4
to control 1 TV, 1 CD Player and 2 VCRs. To
accomplish this, you would reassign the CBL/SAT
key to operate the desired component, in this
case, a second VCR. The chart below shows you
how to reassign a particular device key and then
set up your new component.
TV to VCR/LD SETUP* + 992 + VCR/LD + TV +
TV + SETUP* + VCR or Laser
Disc code.
TV to CBL/SAT SETUP* + 992 + CBL/SAT + TV +
TV + SETUP* + Cable or
Satellite code.
TV to AUDIO SETUP* + 992 + AUDIO + TV +
TV + SETUP* + CD Player
code.
VCR/LD to TV SETUP* + 992 + TV + VCR/LD +
VCR/LD + SETUP* + TV code.
VCR/LD to CBL/SAT SETUP* + 992 + CBL/SAT +
VCR/LD + VCR/LD + SETUP* +
Cable or Satellite code.
VCR/LD to AUDIO SETUP* + 992 + AUDIO + VCR/
LD + VCR/LD + SETUP* + CD
Player code.
CBL/SAT to TV SETUP* + 992 + TV + CBL/SAT +
CBL/SAT + SETUP* + TV code.
CBL/SAT to VCR/LD SETUP* + 992 + VCR/LD + CBL/
SAT + CBL/SAT + SETUP* + VCR
or Laser Disc code.
CBL/SAT to AUDIO SETUP* + 992 + AUDIO + CBL/
SAT + CBL/SAT + SETUP* + CD
Player code.
AUDIO to TV SETUP* + 992 + TV + AUDIO +
AUDIO + SETUP* + TV code.
AUDIO to VCR/LD SETUP* + 992 + VCR/LD +
AUDIO + AUDIO + SETUP* +
VCR or Laser Disc code.
AUDIO to CBL/SAT SETUP* + 992 + CBL/SAT +
AUDIO + AUDIO + SETUP* +
Cable or Satellite code.
*NOTE: Here you must hold SETUP until the
One For
All
®
Easy 4
’s red light blinks twice.
Remember, if you want to use your
One For All
®
Easy 4
to operate your Cable Box, Satellite, or DSS,
press the CBL/SAT key first.