One for All URC-7544 Universal Remote User Manual


 
24 WWW.ONEFORALL.COM
Scan
Your ONE FOR ALL 4 Digital comes with a special SCAN function which
lets you “scan” through every Channel available on your Television,
Video Recorder or DVD Player, Satellite or Cable Converter.
For example, to scan the programmes on your TV:
Aim the ONE FOR ALL 4 Digital at your TV. Press the TV
key. Press and release MAGIC then press the MUTE
key.
The ONE FOR ALL 4 Digital will send the command to
advance through all the Channels available on your
Television stopping at each channel for about three
seconds. Remember, you must aim the ONE FOR ALL at
your device the entire time you are using Scan.
When you find a channel you would like to watch, simply press
any key to stop the SCAN feature.
Volume Punch Through
You may be able to use some features of your Television, Video
Recorder or DVD Player, Satellite or Cable Converter at the same time.
If you're watching a programme on your Video, you can adjust the
volume (a TV function) without first pressing the TV key. The chart
below lists some of the possibilities:
Last Key Pressed: You Can Control:
VCR TV volume up and down, mute
SAT TV volume up and down, mute
AUX TV volume up and down, mute
To punch through to TV volume while in the VCR, SAT or AUX mode:
1 Press and hold MAGIC until the red light blinks twice.
2 Press 9 9 3.
3 Then press the TV key and the red light will blink twice.
To cancel the "Volume Punch Through":
1 Press and hold MAGIC until the red light blinks twice.
2 Press 9 9 3.
3 Press the Volume (+) key and the red light will blink four times.
Advanced Features
Note: If the original remote of your Video Recorder or DVD Player, Satellite
or Cable converter has its own volume keys, then the “Volume Punch
Through” does not work.
1
2
Important notes:
- To use SCAN with your Video Recorder or DVD Player, Satellite or Cable converter,
follow the same instructions above, only press the VCR or SAT key during step 1.
- SCAN may not function with devices that did not have (a) channel +/- key(s) on
the original remote control.
MUTE