Onkyo DV-S555 DVD Player User Manual


 
11
Rear panel
Display
TITLE CHAPTER TRACK REMAIN
LAST
COND.
DTS
REPEAT
DVD VCD
D
GUI
12345 67 89
~=-0
L
MONO
R
VIDEO
OUTPUT
Y
P
B
P
R
COMPONENT
OPTICAL
COAXIAL
AC
INLET
REMOTE
CONTROL
ANALOG
OUTPUT
DIGITAL
OUTPUT
VIDEO
S VIDEO
DV-S555
DVD
PLAYER
213 4 567 8
1 £/8 indicator
2 Inserted disc indicator
3 TITLE indicator
4 Angle icon indicator
5 CHAPTER/TRACK indicator
6 REPEAT indicator
7 REMAIN indicator
8 LAST indicator
9 COND. indicator
0 ŸD indicator
- DTS indicator
= GUI indicator
Indicates an on-screen menu operation is being performed. On-
screen menu helps you set up the player.
~ Multifunctional indicator
(e.g. operating status and error messages)
1 VIDEO OUTPUT VIDEO jack [13]
Connect to the video input on a TV or monitor or AV amplifier or
receiver with video input capability.
2 VIDEO OUTPUT S VIDEO jack [13]
If your TV or monitor has an S-video input, clear picture
reproduction is possible by connecting the player to your TV or
monitor via the S-Video jack.
You can switch between [S1] and [S2] S-video output from the
Setup menu.
3 VIDEO OUTPUT COMPONENT jacks [13]
If your TV or monitor has component video inputs, you can
produce a higher quality picture on your TV or monitor by
connecting to the component video outputs on this unit.
4 ANALOG OUTPUT jacks [13, 14]
Use to output two-channel audio (analog) to the audio stereo
inputs on a TV or stereo amplifier. If you are connecting to a
receiver that has both digital and analog input jacks for DVD
player connection, it may be beneficial to make both connections.
5 DIGITAL OUTPUT OPTICAL jack [14]
Use to output the digital audio signal recorded on discs. You can
output the digital signal via the optical output jack to an AV
amplifier or receiver.
6 DIGITAL OUTPUT COAXIAL jack [14]
Use to output the digital audio signal recorded on discs. You can
output the digital signal via the coaxial output jack to an AV
amplifier or receiver.
7 z jack [14]
Use to connect this player to another component bearing the z
mark. This lets you control this unit as though it were a
component in a system.
8 AC INLET [15]
Use to connect the power cord to the wall outlet.
(USA and Canadian models rear panel shown)