Filter
Top Products
11
■ Rear panel
■ Display
12 56 743 89 0-
@!~=
L
MONO
R
VIDEO OUTPUT
Y
P
B
P
R
OPTICAL
COAXIAL
REMOTE
CONTROL
ANALOG
OUTPUT
DIGITAL OUTPUT
VIDEO
S VIDEO
COMPONENT
81 2 3 4 5 67
1 ŸD indicator
2 Inserted disc indicator
3 TITLE indicator
4 GUI indicator
(Lights up while the initial setup screen appears.)
5 PBC indicator
6 CHAP/TRACK indicator
7 Angle icon indicator
8 REPEAT indicator
9 TOTAL/REMAIN indicator
0 LAST indicator
- COND indicator
= PROGRESSIVE indicator
~ DTS indicator
! £/8 indicator
@ Multifunctional indicator
(e.g. operating status and error messages)
1 VIDEO OUTPUT VIDEO jack [13]
Connect to the video input on a TV or monitor or AV amplifier or
receiver with video input capability.
2 VIDEO OUTPUT S VIDEO jack [13]
If your TV or monitor has an S-video input, clear picture
reproduction is possible by connecting the player to your TV or
monitor via the S-Video jack.
You can switch between [S1] and [S2] S-video output from the
Setup menu.
3 VIDEO OUTPUT COMPONENT jacks [13]
If your TV or monitor has component video inputs, you can
produce a higher quality picture on your TV or monitor by
connecting to the component video outputs on this unit.
If you connect a TV that is compatible with a progressive scan
signal, you can enjoy both Interlaced and Progressive scan.
4 ANALOG OUTPUT jacks [13, 14]
Use to output two-channel audio (analog) to the audio stereo
inputs on a TV or stereo amplifier. If you are connecting to a
receiver that has both digital and analog input jacks for DVD
player connection, it may be beneficial to make both connections.
5 DIGITAL OUTPUT OPTICAL jack [14]
Use to output the digital audio signal recorded on discs. You can
output the digital signal via the optical output jack to an AV
amplifier or receiver.
6 DIGITAL OUTPUT COAXIAL jack [14]
Use to output the digital audio signal recorded on discs. You can
output the digital signal via the coaxial output jack to an AV
amplifier or receiver.
7 z jack [14]
Use to connect this player to another component bearing the z
mark. This lets you control this unit as though it were a
component in a system.
8 AC OUTLET
The AC power cord of another component can be connected to
this AC OUTLET connector.
This means that if the DV-L5X is plugged into an AC outlet, AC
power is available to this AC OUTLET even if the DV-L5X is off.
The shape and capacity of the AC outlet may differ depending on
the area of purchase. Make sure that the capacity of other
components connected to this unit does not exceed the capacity
that is printed on the rear panel.