Filter
Top Products
38
Using a Macro function
1. Press and hold down the corresponding MODE button and
press the MACRO MODE button, then release the buttons.
When you press the MODE button, the SEND/LEARN indica-
tor lights up. When you press the MACRO MODE button, the
indicator turns off. When you release the buttons, the indicator
flashes once.
2. Press the MACRO MODE button again.
The SEND/LEARN indicator flashes twice slowly. The learned
operation is erased.
1. Press and hold down any one of the MODE buttons and
press the MACRO DIRECT button. Then release the but-
tons.
When you press the MODE button, the SEND/LEARN indica-
tor lights up. When you press the MACRO DIRECT button, the
indicator turns off. When you release the buttons, the indicator
flashes once.
2. Press the MACRO DIRECT button again.
The SEND/LEARN indicator flashes twice slowly. The learned
operation is erased.
Note:
• If you do not press any button for more than 30 seconds, the
SEND/LEARN indicator flashes three times quickly, then the
RC-391M exits Learning mode. Resume Step 1.
• If you press a wrong button in Step 2, you may have overwritten
the memory of the button you pressed.
Erasing a learned remote controller button oper-
ation from the MACRO MODE buttons
Erasing a learned remote controller button oper-
ation from the MACRO DIRECT button
1
1, 2
1, 2
1