Filter
Top Products
SETUP MENU OPTIONS
66
o HDCD Decoding: On
o Coaxial Optical Output: (any – not in use)
Also set the Speaker Configuration in the Audio Processing menu:
x Set Down Mix to 7.1Ch or 5.1Ch.
x Set the speaker size and subwoofer according to your actual audio hardware. (see page 69)
x Enable or select the multi-channel analog inputs on your receiver
Coaxial or Optical Digital Audio to Receiver
If the player is connected to an A/V receiver with Coaxial/Optical inputs (as described on page 17), and the A/V
receiver supports Dolby Digital and DTS decoding, the following audio format setup options are recommended:
o Secondary Audio: Off (or On if you need secondary audio)
o HDMI Audio: Off
o SACD Output: (any – SACD is not available through optical/coaxial
outputs)
o HDCD Decoding: On (or Off if the receiver can decode HDCD)
o Coaxial Optical Output: Bitstream
Stereo Analog Audio to Receiver
If you primarily listen to stereo content or if your receiver only offers stereo audio connections, please use the
analog RCA-style cables to connect the FL (Front Left) and FR (Front Right) terminals of the player to your
receiver (as described on page 16). The following audio format options are recommended:
o Secondary Audio: Off (or On if you need secondary audio)
o HDMI Audio: Off
o SACD Output: PCM or DSD (depending on your listening preference)
o HDCD Decoding: On
o Coaxial Optical Output: (any – set to 192k LPCM may help to get the best
analog audio quality)