Filter
Top Products
INSTALLATION
12
Connecting to a TV and A/V Receiver via Dual HDMI
Rear Panel
HDMI IN
HDMI Cable 1
HDMI Cable 2
AUDIO/VIDEOMULTI- CHANNEL
RECEIVER
HDMI IN
x The BDP-105 provides a “Dual HDMI” connection to make sure you can enjoy the highest
possible video quality, in addition to high bit rate audio content. You can use the included HDMI
cable to connect the HDMI 1 output to your HDTV and use another HDMI cable (not included) to
connect the HDMI 2 output to your receiver by setting the Dual HDMI Output option in the Setup
Menu to Split A/V (see page 55 for details). In this way you can utilize the dedicated video
processor available for the HDMI 1 output, and allow your receiver which has no HDMI 1.4
inputs
to work without any loss to the digital audio signals.
x This configuration is recommended when you have a 3D-compatible display, but your receiver is
not 3D-compatible. This allows you to send the video signal (3D, in this case) directly to the TV
and the audio signal to the receiver to be distributed to your speakers as it normally would.
NOTE
x Please refer to the notes on HDMI connections available on page 11.
x If your receiver does not have HDMI audio input capability, please try the alternate connection
methods discussed on pages 18 and 19.