Filter
Top Products
26
RECORDING
There are three ways to record using your VCR
— immediate recording, automatic timer re-
cording, and dubbing.
Your VCR automatically records the audio sig-
nal and adjusts the sound level while it records.
The video cassette you use for recording must
have the erase-protection tab in place. If the
tab is removed, the cassette automatically
ejects if you try to record on it (see “Erase Pro-
tection” on Page 26).
RECORDING SPEEDS
You can select one of three VHS recording/
playback speeds: SP (standard play), LP (long
play), and EP (super long play).
SP is the fastest recording speed and results in
the highest quality picture. LP and EP record
more slowly and use less tape, but the picture
quality is not as high as a recording made at
the SP speed.
TAPE SELECTION
The quality of tape you use greatly affects
record/playback quality and the life of the VCR.
Use only video cassettes that display the offi-
cial (VHS) logo. High-grade tape has a better
oxide coating that helps prevent dirty video
heads and gives the best results.
Although T-160 video cassettes offer the long-
est recording time, they contain thinner tape
that is more likely to jam. We suggest you use
T-120 or shorter length tape.
The following chart shows the maximum re-
cording times for different-length tapes at the
recording speeds.
ERASE PROTECTION
Video cassettes have an erase-protection tab
to prevent accidental erasure of a tape. To pre-
vent recording, break off the tab using a screw-
driver. The cassette automatically ejects if you
try to record on the tape.
If you want to record on a video cassette that
does not have the tab, put a piece of heavy
plastic tape over the erase-protection tab hole.
TAPE
LENGTH
SP LP EP
T-60 1 hour
(60 min-
utes)
2 hours
(120 min-
utes)
3 hours
(180 min-
utes)
T-120 2 hours
(120 min-
utes)
4 hours
(240 min-
utes)
6 hours
(360 min-
utes)
T-160 2
2
/
3
hours
(160 min-
utes)
5
1
/
3
hours
(320 min-
utes)
8 hours
(480 min-
utes)
Tape
16-547.fm Page 26 Tuesday, July 20, 1999 4:45 PM