Filter
Top Products
17
Changing the On-Screen Language
You can change the on-screen language at
any time.
1. Press
MENU
to display the main menu.
2. Use
SEL
s/t to highlight the fourth item,
then press
SET
.
Note:
The title of the fourth item differs
depending on the current language. If the
current language is English, the title shows
in Spanish and French (
IDIOMA/
LANGUE
). If it is in French, the title shows
in English and Spanish (
LANGUAGE/
IDIOMA
). If it is in Spanish, the title shows
in French and English (
LANGUE/LAN-
GUAGE
).
3. Press
SET
so the desired language
appears next to the fourth item.
4. Press
MENU
to return to the normal screen.
Resetting the VCR’s Memory
If at any time you want to erase all settings, in-
cluding the time, local channels, and pro-
grammed events, eject any loaded tape then
press and hold
PLAY
and
REW
on the VCR for
at least 5 seconds. The VCR clears all settings
and turns off.
The next time you turn on the VCR, it performs
its initial setup sequence.
16-548.fm Page 17 Tuesday, July 20, 1999 4:54 PM