Filter
Top Products
28
SELECTING THE SIGNAL
TO RECORD
Follow these steps to select the signal to
record — from the
IN FROM ANT
jack or an au-
dio/video source.
1. Press
MENU
. The TV displays the main
menu.
2. Press
SEL
s/t to highlight
SET
UP
VCR
,
then press
SET
. The TV displays the
SET
UP
VCR
menu.
3. Press
SEL
s/t to highlight
INPUT
SELECT
, then press
SET
so the TV dis-
plays the desired indicator:
TUNER
to
record from a source connected to the
IN
FROM ANT
terminal,
LINE
1
or
LINE
2
to
record from a source connected to the
AUDIO 1/VIDEO 1 IN
or
AV2 AUDIO/VIDEO IN
jacks.
Notes:
• To select
LINE
1
or
LINE
2
, you can also
press
CH
s/t to set the VCR to one channel
higher than the highest channel number (or
one channel lower than the lowest channel
number).
• Select
LINE
1
for recording signals from
the back
AUDIO 1/VIDEO 1 IN
jacks, or
LINE
2
for recording signals from the front
AV2 AUDIO/VIDEO IN
jacks.
RECEIVING/RECORDING
STEREO/SAP BROADCASTS
(MODEL 61 ONLY)
The Model 61 has three channels for audio re-
cording — two (left and right) stereo channels
on the Hi-Fi track, and one monaural channel
on the standard track.
Press
DISPLAY
to display the audio programs
available on the broadcast you are currently
tuned to. The TV displays
STEREO
,
SAP
, and
MONO
. Audio modes that are not available are
shown in parenthesis. The current audio mode
is indicated by an arrow.
When the broadcast contains a SAP (second-
ary audio program) signal, you can choose to
record the main stereo signal, the SAP signal,
or a mono signal by changing the setting in the
SET
UP
VCR
menu.
1. Press
MENU
, highlight
SET
UP
VCR
using
SEL
s/t, then press
SET
.
2. Highlight
SET
AUDIO
MODE
using
SEL
s/t,
then press
SET
.
3. Highlight
AUDIO
MODE
using
SEL
s/t, then
press
SET
until the desired option —
STE-
REO
,
SAP
, or
MONO
— appears on the
screen.
4. Repeatedly press
MENU
to return to the
normal screen.
16-548.fm Page 28 Tuesday, July 20, 1999 4:54 PM