28
3. If necessary, repeatedly press
PLAY
or
STOP
to highlight
SET
UP
COMMER-
CIAL ADV.
.
4. Press
FF
. You see:
5. Repeatedly press
PLAY
or
STOP
to high-
light
C/A RECORD
, then press
FF
to
select
ON
or
OFF
.
ON
— With this setting, when you press
STOP
to end a recording, the VCR prompts
you, when you stop recording or turn the
VCR off, to have commercials marked.
OFF
— The VCR does not mark commer-
cials.
6. When you finish setting up Commercial
Advance, press
MENU
three times.
Notes:
• It takes several minutes for the VCR to
mark the recording.
• The VCR marks commercials in a timer
recording after the recording stops (see
“Automatic Timer Recording” on Page 37).
• If the interval between two timer recordings
is not long enough to allow commercial
marking, the VCR waits until after the next
timer recording.
• The VCR can store up to eight timer
recording settings or 40 commercial loca-
tions in memory at one time. When the
memory becomes full, the remaining com-
mercials are not marked.
• The Commercial Advance feature turns off
if there is a power failure.
• If you rewind the tape and start another
recording before power is turned off, com-
mercials might not be correctly marked.
Marking an Unmarked Tape
You can go back and add Commercial Ad-
vance markings to a tape you’ve already re-
corded.
1. Insert the tape on which you want to add
the marking(s). Be sure the erase-protec-
tion tab is in place (see “Erase Protection”
on Page 32).
2. Use
FF
or
REW
to position the tape to a
point 2 to 3 minutes before the first com-
mercial begins.
3. Press
MENU
to display the main menu.
4. Repeatedly press
PLAY
or
STOP
to high-
light
SET
UP
VCR
, then press
FF
.
5. Repeatedly press
PLAY
or
STOP
to high-
light
SET
UP
COMMERCIAL
ADV.
, then
press
FF
.
6. Repeatedly press
PLAY
or
STOP
to high-
light
MARK
UNMARKED
TAPE.
, then
press
FF
.
START
MARKING
FROM CUR-
RENT
TAPE
POSITION.
appears.
7. Press
PLAY
and let the recording play to
the end. CA flashes on the VCR’s display.
Press
STOP
twice at the end of the record-
ing. The VCR rewinds the tape, displays
NOW
MARKING
COMMERCIALS
on the TV
screen for a few seconds, then searches
for and marks the commercial portion(s).
Notes:
• CA continues to flash on the VCR’s dis-
play until the VCR has finished marking
commercials.
V
CR
ON
C
I
A
L
A
D
V
.
Y
Y
Y
C
IAL ADV.
:
OFF
: AUTO
TAPE.
Y
16-551.fm Page 28 Tuesday, July 20, 1999 5:13 PM