Filter
Top Products
SLEEP 0 MINUTE
C C C C C C C C C C C C
BRIGHT
–
PPPPPPPPPPPPPPCCPPPPPPPPPPPPPP
+
SLEEP TIMER SETTING
The Sleep Timer function is used to turn off the
unit without pressing
[POWER] after a desired time.
1 Press [PICTURE / SLEEP] to
display the Sleep Timer menu.
2 Within 10 seconds, set your desired sleep time
using
[s / B].
• [B]...Increase by 10 min. (Up to 120 min.)
•
[s]...Decrease by 10 min.
NOTE:
•To cancel the Sleep Timer, use [CLEAR] or [s / B]
to set the time to "0".
3 To confirm the remainder time to shutdown,
press
[PICTURE / SLEEP].
PICTURE CONTROL
The picture controls are preset to factory defaults,
but you can change them to your desired setting.
1 Press [PICTURE / SLEEP]
repeatedly until desired control
is displayed.
2 Use [s / B] to adjust to your desired level within
5 seconds.
• Even if any power failure occurs, the unit will
retain its memory for this feature.
COLOR
TINT
SHARPNESS
BRIGHT
CONTRAST
to pale
to purple
to soft
to decrease brightness
to decrease contrast
to brilliant
to green
to clear
to increase brightness
to increase contrast
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B CAPTION [CAPTION1]
- TV SETUP -
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
B CAPTION [OFF]
CLOSED CAPTION SYSTEM
You can view specially labeled (cc) TV pro-
grams, movies, news and pre-recorded tapes with
either a dialogue caption or text display.
1 Press [SET-UP].
Use
[
KK
/
LL
] to point to
"CAPTION".
2 Press [ENTER] repeatedly to
select your desired caption
mode.
•
CAPTION mode: You can watch dramas, movies and
news while captioning the dialogues and the contents
of news.
• TEXT mode: You can watch half screen text informa-
tion if you want.
*"CAPTION2" is usually used for a second language (if
available).
3
Press [SET-UP] to exit the menu.
NOTES:
•Even if any power failure, the unit will retain its mem-
ory for this feature.
•Some programs are not broadcasted with closed
captions.The unit is designed to provide error-free
closed captions with high quality antenna, cable and
VCR signals. Conversely, poor quality signals are
likely to result in caption errors or no captions at all.
•Common signal conditions which may cause caption
errors are listed below:
- Weak snowy reception on TV screen
- Multiplex signal reception displaying picture
ghosts or airplane flutter
•If the unit displays a black box on
the TV screen, this means that
the unit is set to the TEXT mode.
To clear screen, select "CAP-
TION1", "CAPTION2" or "OFF".
TO CANCEL THE CLOSED CAPTION SYSTEM
1 Press [SET-UP]. Use [
KK
/
LL
] to point to
"CAPTION".
2 Press [ENTER] repeatedly to select "OFF".
3 Press [SET-UP] to exit the menu.
10
EN
TV SECTION
TV OPERATION AND SETTINGS
TV
TV
SLEEP TIMER / PICTURE CONTROL
You can set Sleep Timer and picture
adjustment with
[PICTURE / SLEEP].
• The menu changes as described below every time
you press
[PICTURE / SLEEP].
Sleep Timer
BRIGHT
CONTRAST
COLOR
TINTSHARPNESS
TV
TV
T8200UA(EN).QX3 06.2.6 0:02 PM Page 10