Sylvania 6615LDG TV DVD Combo User Manual


 
18
EN
Shaded buttons are used for following operation.
GETTING STARTED
Turn on the power of amplifier and any other compo-
nents, if necessary.
1 Press [POWER] then the power will turn on.
2 Open the disc door manually.
3
Insert a disc with the label facing back of the unit to
start playing it. By simply placing the disc gently into
the slot, it will be loaded automatically.
Playback will start from the first chapter/track of the disc.
If the playback does not start automatically,
press [PLAY O].
When you playback a DVD which features a
title menu, it may appear on the screen. In this
case, refer to “TITLE MENU” on page 19.
4 Press [STOP C] to stop playback.
5
Press [EJECT A] to remove the disc from the unit.
When the DVD mode has been switched to the
TV mode, the DVD mode shuts down first and
then the TV picture and sound appears in about
4 seconds. Similarly, when [POWER] is
pressed to turn off in the DVD mode, this mode
shuts down first and then the unit is turned off.
“”may appear at the top-right on the TV
screen during operation, warning that a pro-
hibited operation has been encountered by the
DVD or the disc.
With DVDs that use titles for playback pro-
gram signals, playback may start from the
second title or it may skip these titles.
During the playback of a two layered disc,
pictures may stop for a moment. This happens
when the 1st layer switches to the 2nd layer.
This is not a malfunction.
MP3 PLAYBACK
1 In stop mode, press [DISC MENU], then press
[
KK
] or [
LL
] to select the desired group or track.
If a group is selected, press [B] or [ENTER] to go
on to the track selection screen. Press [s] to go
back to previous screen.(except for the top page.)
If a track is selected, press [ENTER] to start
playing tracks. Starting from the one you’ve just
chosen the subsequent tracks will be played.
If the entire file list cannot be displayed at once
on a screen, “n” appears to go to the next page.
Press [TITLE] to return to the top file of the
highest hierarchy in the program and file list.
2 Press [STOP
CC
] to stop playback.
Folders are known as Groups; files are known as Tracks.
MP3 files are accompanied by icon.
Maximum of 255 folders can be recognized.
Maximum of 999 files can be recognized.
Up to 8 hierarchies can be created.
This unit recommends the use of files recorded
at the below specifications:
Sampling frequency: 44.1kHz or 48kHz
Constant bit rate: 32kbps ~ 320kbps
For MP3 file recorded in Variable Bit Rate (VBR),
the unit may not display the actual elapsed time.
3
PLAYING A DISC
BASIC PLAYBACK
REV
SLOW
PLAY
STOP
FWD
ENTER
PAUSE
DISC
MENU
RETURNTITLESETUP
DISPLAY
SKIP
MUTEZOOM
SELECT
POWER PICTURE
EJECT
3
POWER
STOP
EJECT
NOTE
folder name 1
folder name 2
folder name 3
folder name 4
file name 1
file name 2
file name 3
folder name 1
DISC
MENU
STOP
NOTE