Sylvania 6720FDD TV VCR Combo User Manual


 
47
EN
01A11
Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked
possibilities. Before arranging for service, check these items. It could save your time and money.
TV/VCR Mode
TROUBLESHOOTING GUIDE
PROBLEM CORRECTIVE ACTION
No picture and sound.
Make sure the AC cord is connected to an AC outlet.
Check antenna connection.
Press the SELECT button on the remote control to select TV mode.
Then try other TV feature.
Let the TV/DVD/VCR program its tuner memory.
No picture or poor picture on
Adjust direction or replace antenna.
TV/DVD/VCR.
Adjust picture controls.
No sound or poor sound.
Adjust volume control on remote control or main unit.
Press the MUTE button to restore sound.
Bars On Screen
If outside antenna is being used, check for broken wire.
Check for local interference.
Picture Distorted or Blurred
Try a new channel, if OK, then possible station trouble.
If outside antenna is being used, check for broken wire.
Picture Rolls Vertically
Try a new channel, if OK, then possible station trouble.
Lines or Streaks in Picture
If outside antenna is being used, check for broken wire.
Check for local interference.
No Color
Try a new channel, if OK, then possible station trouble.
Is antenna connected to terminal on the back of the set?
If outside antenna is being used, check for broken wire.
Adjust COLOR control.
Poor Reception on Some Channels
Try a new channel, if OK, then possible station trouble.
Ghosts in Picture
Is antenna connected to terminal on the back of the set?
If outside antenna is being used, check for broken wire.
Check for local interference.
Weak Picture
Try a new channel, if OK, then possible station trouble.
Is antenna connected to terminal on the back of the set?
If outside antenna is being used, check for broken wire.
Adjust CONTRAST & BRIGHT control.
Sound OK, Picture Poor
Try a new channel, if OK, then possible station trouble.
Is antenna connected to terminal on the back of the set?
If outside antenna is being used, check for broken wire.
Check for local interference.
Adjust CONTRAST & BRIGHT control.
If the TV/DVD/VCR does not perform properly when operated as instructed in this Owners Manual, check
the player, consulting the following checklist.
PROBLEM CORRECTIVE ACTION
No power.
Make sure the power plug is connected to an AC outlet.
Make sure the power is turned on.
The TV/DVD/VCR does not
Check if the power plug is connected to an AC outlet.
respond to the remote control.
Check the batteries in the remote control.
Aim the remote control directly at the remote sensor. If necessary,
remove all the obstacles between the sensor and the remote.
You have to be within 23 feet of the TV/DVD/VCR.
Check if the correct mode is selected. If not switch the mode by
pressing the SELECT button on the remote control,whichever you need.
TD900UA(P36-52).QX33 03.7.31 1:22 PM Page 47