Sylvania 6720FDF TV VCR Combo User Manual


 
This shows the elapsed recording or playback time in
hours, minutes, and seconds. (The displayed time will
not change on a blank tape or blank portions on the
tape.) The “–” indication will appear when the tape has
rewound further than “0:00:00” on the tape counter.
TV/VCR
- 28 - EN- 28 - EN
INDEX SEARCH
This feature provides a method of indexing the start-
ing point so that it can be easily returned to in either
fast forward or rewind mode.
The index mark will be made automatically when
[RECORD] is hit. It will also be marked at the
starting point of Timer recording and OTR.
The index mark will not be recorded if [PAUSE
F] is hit and released during recording.
The time gap between making the index marks on
the tape should be greater than 1 minute for SP
recording, 2 minutes for LP recording and 3 min-
utes for SLP recording.
In some cases, the index mark at the beginning of
video tape cannot be detected.
Example: You are watching program number 4 and
want to fast forward to program number 7. You
must skip three programs.
TV/VCR
1 Select “INDEX SEARCH”
Hit [SETUP].
Press
[K / L] to point to “INDEX
SEARCH”, then hit
[ENTER].
2 Enter your desired number
Press [K / L] until the number of
programs that you want to skip
appears.
(Example: “03” for 3 programs)
The Index Search mode will be canceled if the pro-
cedures are not activated in 30 seconds.
3 Begin Index Search
Press [s / B]. The unit begins rewinding or fast for-
warding to the beginning of desired program.
NOTE:
Every time an index signal is skipped, the number
in the program indicator decreases by one.
4 After Index Search
When the preset program is reached, the unit will
start playback automatically.
A video cassette must be inserted in the unit for
this function to work.
The number of Index Searches can be set up to 20.
This function will not operate in the recording mode.
When you want to cancel the Index Search while
in progress, hit
[
STOP C
]
.
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5 Pro.6 Pro.7
4321123
End of
the tape
Beginning of
the tape
CURRENT PLAYBACK PROGRAM
INDEX MARK
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
B INDEX SEARCH
INDEX SEARCH
0 3
SPECIAL FEATURES
REAL TIME TAPE COUNTER AUTO REWIND-EJECT
When the end of a tape is reached during record-
ing, playback, or fast-forward, the tape will auto-
matically rewind to the beginning. After rewinding
finishes, the unit will eject the tape and turn itself
off.
This function is operative when Repeat Play is set
to the [OFF] position.
The tape will not auto-rewind during timer record-
ing or One Touch Recording.
TV/VCR