Filter
Top Products
–
39
–
EN
SPECIAL PLAYBACK FUNCTION
REPEAT
REPEAT TITLE / CHAPTER
To activate the repeat function, hit [REPEAT]
during playback.
¡The repeat mode changes as described below every
time you hit the button.
DVD-V
REPEAT is available only during playback.
CHAPTER TITLE OFF
(current chapter repeat) (current title repeat)
(repeat
off)
NOTES:
¡Repeat Title/Chapter is not available with some
scenes.
¡The REPEAT setting will be cleared when moving
to other title or chapter.
REPEAT TRACK
To activate the repeat function, hit [REPEAT]
during playback.
¡The repeat mode changes as described below every
time you hit the button.
CD
TRACK ALL OFF
(current track repeat) (entire disc repeat)
(repeat
off)
NOTES:
¡Repeat setting will be cleared when moving to other
track.
¡Repeat playback does not function during A-B
repeat playback.
A-B REPEAT
1 Hit [A-B] at your chosen starting point.
¡“ A-” appears briefly on the TV screen.
2 Hit [A-B] again at your chosen end point.
¡“ A-B” appears briefly on the TV screen, and the
repeat sequence begins.
3 To exit the sequence, hit [A-B].
NOTES:
¡The A-B repeat section can only be set within the cur-
rent title (for DVDs) or current track (for Audio CDs).
¡A-B repeat is not available with some scenes in DVD.
¡To cancel the A point which was set, hit [CLEAR].
¡A-B repeat playback does not function during title,
chapter, track or all repeat playback.
CD
DVD-V
PROGRAM
You may determine the order in which tracks will play.
1 In the stop mode, hit [MODE].
¡The “PROGRAM” screen will appear.
2 Press [▲ / ▼] to select a track, then hit
[ENTER].
¡Hit [CLEAR] to erase the
most recently entered track.
¡If the entire Program cannot be
displayed at once on a screen,
“G” appears to go to the next
page and “H” appears to go
back to the previous page.
3 Repeat step 2 until you have selected all the
tracks you want to play in the program.
4
Hit [PLAY O] to play the programmed tracks.
NOTES:
¡While the program is being played back, hitting
[STOP C] works as follows.
¡Hit [STOP C] once and then [PLAY O] again,
playback will restart from the point where
[STOP C] was hit. (Program continued)
¡Hit [STOP C] twice and then [PLAY O] again,
playback will restart from the track in the usual way.
(Program canceled)
¡Up to 99 tracks can be entered.
¡To erase all tracks in the program at once, select
“ALL CLEAR” at the bottom of the list at step 2.
¡If you like to repeat the current track in the program,
hit [REPEAT] several times until “ TRACK”
appears during playback. If you like to repeat the
entire program hit [REPEAT] several times until
“ ALL” appears during playback.
CD
TOTAL
1/4 2/3
1 3:30
5 5:10
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
1:03:30
RANDOM PLAYBACK
This function shuffles the playing order of tracks
instead of playback in the sequence.
1 In the stop mode, hit [MODE] twice.
¡“RANDOM” screen appears.
2 Hit [PLAY O] to start random playback.
NOTE:
¡
If you like to repeat the current track in the random
selection, hit
[REPEAT] several times until “
TRACK” appears during playback. If you like to repeat
the entire random selection hit
[REPEAT] several
times until “ ALL” appears during playback.
CD
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
RANDOM