Filter
Top Products
DVD Functions
EN
–
21
–
4
AUDIO
DRC
ON
DOWN SAMPLING
ON
DOLBY DIGITAL
BITSTREAM
ENTER
Hint
STILL MODE:
• Select “AUTO” usually.
• If you select “AUTO”,
automatically select the
best resolution setting
(FRAME or FIELD) based
on the data characteristics
of the pictures. (default).
• If you select “FIELD”, the
picture in the still mode will
be stabilized.
• If you select “FRAME”, the
picture in the still mode will
be highly defined.
• An individual picture on TV
screen is called a “frame”,
which consists of two
separate images called a
“field”.
•
Some pictures may be
blurred if you select
“AUTO” in the still mode due
to their data characteristics.
You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.
4
Select the desired item.
DISPLAY menu
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to 3
in the “CUSTOM Menu” section on page 20.
Select the desired item.
AUDIO menu
5
SETUP
Hint
DRC:
• This function is available
only on the discs which
are recorded in the Dolby
Digital format.
DOWN SAMPLING:
• When playing disc with
copyright protection, the
sound will be down sampled
at 48kHz, even if you set
to “OFF”.
•
This function is available
only on digital outputting of
a disc recorded in 96kHz.
DISPLAY
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
ENTER
DISPLAY Setting
B
AUDIO Setting
C
6
SETUP
To exit the menu
6 To exit
the TV ASPECT
or STILL MODE
screen
To complete the
PROGRESSIVE
setting
ENTERENTER
Hint
TV ASPECT:
• Select “4:3 LETTER BOX”, so that
black bars may appear on the top
and bottom of the screen.
• Select “4:3 PAN & SCAN” for a
full height picture with both sides
adjusted.
• Select “16:9 WIDE” if a wide screen
TV is connected to this unit.
PROGRESSIVE:
• You can set “PROGRESSIVE” to
“OFF” in the DISPLAY menu or
press and hold [PLAY B] on the
front of the unit for more than 5
seconds during playback, so that
the PROGRESSIVE SCAN indicator
on the front panel lights off.
• When “PROGRESSIVE” is “ON”,
video signals from the unit’s VIDEO
OUT and S-VIDEO OUT jacks will
be distorted or not be output at all.
5
TV ASPECT:
QUICK
(Default: 4:3 LETTER BOX)
See Hint on the left.
TV ASPECT
4:3
LETTER BOX
4:3
PAN & SCAN
16:9
WIDE
TV ASPECT
4:3 LETTER BOX
STILL MODE
AUTO
PROGRESSIVE OFF
ENTERENTER
ENTERENTER
STILL MODE: (Default: AUTO)
See Hint on the right.
TV ASPECT
4:3 LETTER BOX
STILL MODE
AUTO
PROGRESSIVE OFF
STILL MODE
AUTO
FIELD
FRAME
ENTERENTER
Select the
desired
setting.
TV ASPECT
4:3 LETTER BOX
STILL MODE
AUTO
PROGRESSIVE
OFF
4:3 LETTER BOX
AUTO
ON
ENTERENTER
ENTERENTER
SETUP
PROGRESSIVE:
QUICK
(Default: OFF)
See Hint on the left.
DRC (Dynamic Range Control): (Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
DOLBY DIGITAL:
QUICK
(Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: Outputs a Dolby Digital Signals.
• PCM: Convert the Dolby Digital into PCM (2 channel).
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL BITSTREAM
OFF
ON
BITSTREAM
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL
BITSTREAM
ON
OFF
BITSTREAM
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL
BITSTREAM
ON
ON
PCM
DOWN SAMPLING: (Default: ON)
Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL BITSTREAM
OFF
ON
BITSTREAM
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL
BITSTREAM
ON
OFF
BITSTREAM
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL
BITSTREAM
ON
ON
PCM
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL BITSTREAM
OFF
ON
BITSTREAM
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL
BITSTREAM
ON
OFF
BITSTREAM
DRC ON
DOWN SAMPLING
ON
DOLBY DIGITAL
BITSTREAM
ON
ON
PCM
ENTERENTER
ENTERENTER
ENTERENTER
Select “Yes”.
Before proceeding…
1. Make sure your TV has progressive scan.
2. Connect with component video cable
NOTE: If there is no picture or picture is
distorted after selecting ‘YES’,
wait about 15 seconds for auto recovery.
Ac tivate Pr ogr essi ve?
SELECT: K / L SET:ENTER
NO
YES
NO
YES
NO
YES
Confirm again to use progressive scan.
If Picture is good, select ‘YES’.
SELECT: K / L
SET:ENTER
Select “Yes”.
Select the
desired
setting.
ENTERENTER
If there is no picture or
you do not press any
buttons for 15 seconds,
Progressive scan will
switch to “OFF” and it
will exit the setup menu.
or
or
or
or
or
or
DVC840G_E8A02UD.indd 21 2006/01/12 13:08:18