Sylvania NB501SL9 DVD Player User Manual


 
16
EN
CONNECTIONS
Audio signals output from DIGITAL OUT jack (COAXIAL)
The audio signals currently output from HDMI OUT jack will be output from DIGITAL OUT jack as well, except that
Dolby Digital signal will be output instead of Dolby Digital Plus and Dolby TrueHD, and DTS signal will be output
instead of DTS-HD.
When “Audio Mute” is selected in “HDMI Audio Out” setting, audio signals output from HDMI OUT jack will be muted
and the audio signals output from DIGITAL OUT jack changes depending on “Digital Out” setting.
To set “Digital Out” setting, select “Audio Mute” in “HDMI Audio Out” setting.
Disc type Audio recording format
“Digital Out” setting
Bitstream LPCM
BD-video
Dolby Digital Dolby Digital 2ch Downmix LPCM
Dolby Digital Plus Dolby Digital 2ch Downmix LPCM
Dolby TrueHD Dolby Digital 2ch Downmix LPCM
DTS DTS* 2ch Downmix LPCM
DTS-HD DTS* 2ch Downmix LPCM
LPCM 2ch Downmix LPCM* 2ch Downmix LPCM
DVD-video /
DVD-RW/-R
(VR mode)
Dolby Digital Dolby Digital 2ch Downmix LPCM
DTS DTS 2ch Downmix LPCM
LPCM 2ch Downmix LPCM 2ch Downmix LPCM
audio CD 2ch LPCM 2ch LPCM
DTS-CD DTS 2ch Downmix LPCM
* For BD titles with secondary or interactive audio, these audio will be output as Dolby Digital when all the conditions
listed below are met:
When “BD Audio Mode” setting is set to “Mix Audio Output”.
When “HDMI Audio Out” setting is set to “Audio Mute”.
When “Digital Out” setting is set to “Bitstream”.
If BD titles do not have secondary or interactive audio, the audio will be output as shown in the table.
This table applies only when HDMI cable is not connected or “Audio Mute” is selected in “HDMI Audio Out” setting.
Note
In order to output LPCM signal from DIGITAL OUT jack while outputting the HDMI audio signal, set “BD Audio
Mode” setting to “Mix Audio Output” and set “HDMI Audio Out” setting to “HDMI Multi(LPCM)”.
Connecting the AC Cord
After you made all necessary connections, connect the AC cord to the AC IN. Then connect the AC cord to the AC
outlet.
Insert the plugs securely. Incomplete connections will result in the generation of noise.
this unit
AC cord
AC 120V, 60 Hz
AC outlet
Supplied cables used in this connection are as follows:
AC cord x 1
E5H26UD_NB501SL9_EN.indd 16E5H26UD_NB501SL9_EN.indd 16 2008/04/14 13:40:422008/04/14 13:40:42