Filter
Top Products
30 EN
PLAYBACK
There are 2 options for the “BD Audio Mode” setting; either
by setting the output to the secondary and interactive
audio accompanied by the primary audio or by setting
only the primary audio. Depending on the setting of the
mode, Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
DTS, or DTS-HD output changes between multi LPCM and
bitstream.
1 In stop mode with BD inserted, press [MODE].
2 Use [K / L] to select your desired setting.
“Mix Audio Output”:
If it is available, BD-video’s secondary and interactive
audio will be output with the primary audio.
• The secondary audio is the audio for the secondary
video (Director’s comment etc.) and the interactive
audio is the audio for the interactive application
(Button click sounds etc.).
“HD Audio Output”:
Only the primary audio will be output. Set this mode in
order to output, Dolby Digital Plus, Dolby TrueHD, or
DTS-HD audio of BD through HDMI connection.
3 Press [RETURN ] to exit.
• You can also set “BD Audio Mode” from the setup
menu. Refer to page 36.
• Refer to “Audio signals output from HDMI OUT jack”
on page 37 and “Audio signals output from DIGITAL
OUT (OPTICAL / COAXIAL) jack” on page 38 for how
BD Audio will be output.
Note
• The secondary audio will not be output when the
secondary video is not displayed or when “BD Audio
Mode” is set to “HD Audio Output”. (For some BD,
secondary audio will be output even when
secondary video is off.)
• The sound mode cannot be changed during
playback of discs not recorded in multiple audio.
• Some discs allow changing the audio language setting
on the disc menu. (Operation varies depending on the
discs. Refer to the manual accompanying the disc.)
• [AUDIO ] may not work on some discs with
multiple audio streams or channels (e.g. DVDs that
allow changing audio setting on the disc menu).
• If you select a language that has a 3-letter-language
code, the code will be displayed every time you
change the audio language setting. If you select any
other languages, “---” will be displayed instead.
(Refer to page 46.)
• Audio Language selection cannot be made during
rapid playback. (Refer to page 26.)
• If 4-digit-language code appears in the subtitle
menu, refer to page 46.
• If the disc has no audio language, “Not Available” will
be displayed on the TV screen.
• For DTS-CD (5.1 music disc), selecting audio streams
or channels is not available.
• For VR mode DVD-RW/-R with MTS (Multi-channel
television sound) system, you can switch among
“1.Main” (main audio), “1. Sub” (sub audio), and
“1.Main/Sub” (main and sub audio).
Setting the BD Audio Mode
Note
• In “Mix Audio Output” mode, if there is no secondary
and interactive audio, the audio will be output as
“HD Audio Output” mode.
BD Audio Mode Mix Audio Output
E5K41UD_EN.book Page 30 Wednesday, December 24, 2008 11:07 AM