- 21 - EN
8H30
AAvoid overlap of programs ...
There is a chance that a program will not be record-
ed. When programs overlap:
•
The program with the earliest start time will record
first.
•
Once the earliest program finishes recording, the
overlapping programs will record in the order of
the program number.
•
The illustration below demonstrates the sequence
of recording.
1 Select “TIMER PROGRAMMING”
Press the MENU button on the
remote control.
Confirm “TIMER PROGRAM-
MING” is pointed to by pressing
the PLAY/K button.
Press the F.FWD/B button.
•
If you have not yet set the clock, “MANUAL
CLOCK SET” appears. If so, follow stops [3] to
[8] on page 11. Then set the timer recording.
2 Select your desired program position (1~8)
Press the PLAY/K or STOP/L
button to select the desired pro-
gram position.
Then, press the F.FWD/B button.
3 Set the channel number
Press the PLAY/K or STOP/L button until the
desired channel number appears.
(Example: CH61)
Then, press the F.FWD/B button.
Remember:
If your TV/VCR is connected to a
cable or satellite box, you must set
the TV/VCR to channel 3 or 4 to match the output
channel of the box.
4 Select once, every day or weekly recording
For once recording :
Press the PLAY/K (up) button
until the desired date appears.
(Example: “7/06” for July 6th).
Then, press the F.FWD/B but-
ton.
TIMER RECORDING
9:00AM 10:00AM 12:00PM
Program 1
10:00AM-11:00AM
Program 2
9:00AM-10:00AM
Program 3
9:30AM-12:00PM
11:00AM
Recording Sequence
*Recording period is SHADED
You may set the TV/VCR to start and end a record-
ing while you are away. You can set 8 programs to
record on specific days, daily or weekly within a 1
year period.
In the example below, the timer is being set to record:
DATE: July 6th, 2001
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL: CH61
TAPE SPEED: SP
Make sure ...
•
If your TV/VCR is connected to a cable or satellite
box, you must set the TV/VCR to channel 3 or 4
to match the output channel of the box.
•
Clock is set to the correct time and date before set-
ting the timer.
•
TV/VCR power is turned on to program it.
•
To insert a cassette tape with its erase prevention
tab in place. (If necessary, rewind or fast forward
the tape to the point at which you want to begin
recording.)
•
To set the channel you want to record
– M E N U –
B TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B
61 -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B
61 7/06 FRI -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
OTR (One Touch Recording)
This function enables you to set the recording length
simply by pressing the REC/OTR button on the
VCR.
1)Begin OTR by pressing the
REC/OTR button on the VCR
repeatedly until the desired
recording length appears.
Recording stops when 0:00 is
reached.
NOTES:
•
This function CANNOT be done from the remote
control.
•
To stop the OTR operation, press the STOP button
on the TV/VCR or on the remote control.
•
If the tape runs out before the end time, the
TV/VCR will switch to the Stop mode immediate-
ly, eject the tape and turn itself off.
OTR(2 : 30)
SP
Push(es) Display Recording length
1 push (continuous recording)
2 pushes 0:30 30 minutes
3 pushes 1:00 60 minutes
4 pushes 1:30 90 minutes
17 pushes 8:00 480 minutes