Filter
Top Products
16
User’s Guide
AUTO SLEEP
If you select Auto sleep on the set will automatically switch
itself to standby mode approximately ten minutes after a TV
Channel stops broadcasting.
1. Repeatedly press the MENU button to select the Special
menu.
2. Press the PR ▲▼ button to select Auto sleep.
3. Press the VOL button to select on.
4. Press the TV/AV button to return to normal TV viewing
BLUE BACK
Programmes without a program signal appear in blue.
AUTO WIDE/ARC
(ASPECT RATIO CONTROL)
Press the ARC button to select a desired picture format.
Each press of the ARC button selects Auto Wide, 16:9, 14:9*,
4:3, ZOOM*, and 1:1* mode.
* Not available on 170 SW model.
SLEEP TIMER
You don’t have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The
display will appear on the screen, followed by 0, 10, 20, 30, 60,
90, 120, 180 and 240. The timer begins to count down from the
number of minutes selected.
Note:
a. To view the remaining sleep time, press the SLEEP button once.
b. To cancel the sleep time, Select 0 with the SLEEP button.
SOUND OUTPUT SELECTION
In VIDEO mode, you can select output sound for the left and right loudspeakers. Repeatedly press
the I/II button to select the sound output.
L+R: Audio signal from audio L input is sent to left loudspeaker and audio signal from audio R
input is sent to right loudspeaker.
L+L: Audio signal from audio L input is sent to left and right loudspeakers.
R+R: Audio signal from audio R input is sent to left and right loudspeakers.
▲
▼
English