Filter
Top Products
Hotel
------
Hotel
*****-
Hotel Off
New
------
New
------
?
Hotel lock setting
3
27
1
2
1
Making use of hotel lock function, you can limit some
functions so that other user can not change your settings.
This function is especially useful in hotel.
Press button on the
remote control, the screen
will display "Hotel ------".
Input the 6-digit password
(the preset password is
123465), the screen will
display "Hotel Off (or On)".
Press VOL+/- to select ON.
Now Hotel Lock function is active now. Only some buttons
(for example, channel select buttons, volume control
buttons, AV button, etc.) can act and the volume is limited.
In Hotel ON mode, the maximum volume level is the level
you set just before you enter the Hotel ON mode. If you
want to change the volume limitation, set the Hotel to OFF
and then adjust the volume, then enter into ON mode
again.
To exit the hotel lock, set Hotel to OFF.
To clear the On-screen display, you can press OK button.
To change Hotel Lock password
The preset password for hotel lock can be changed, the
steps are shown below:
After setting Hotel to OFF mode, press
MENU button, the screen displays
"New ------"
Input the new password and confirm
again.
Now the password has been changed.
To avoid forgetting the password, write it down here:
------
2
+
* Hotel lock is an optional function.
Hotel
------
Hotel
*****-
Hotel Off
Hotel On
Digit buttons
?
+
-
+
-
+
SOUND
S.M
P.M
HOTEL
LOCK
--/
---
OK
MENU
2
5
6
3
9
8
7
4
1
0/AV
+
-
VOL
+
VOL
CH
CH
-
i
MENU button
Clear the OSD
VOL+/- buttons
Enter into
hotel lock setting
Hotel lock setting