Palsonic DVD2060DX DVD Player User Manual


 
22
REFERENCE
Please check the following guide for the possible cause and solution for a problem before contacting the
nearest service centre or dealer for repairs.
SYMPTOMS AND CORRECTIONS
SYMPTOMS
CORRECTIONS
No power
Check to make sure that the power connection is secure.
Make sure the connection between the player and the TV is secure.
No picture
Make sure that the TV is in good working condition.
Press "V.MODE" button continuously until it appear normal
picture.
Make sure the connection between the player and other devices
are secure.
Make sure that the TV and AMP are in good working condition
and setup properly.
Check that the disc is properly inserted.
No sound
Failed to Play
Clean the disc.
Remove obstacles between remote control and unit.
Failed to respond to
remote control
Aim remote control at the sensor on the front panel
Check batteries and replace them if necessary.
Picture Disturbance
Check the disc for dirt and scratches, Clean or replace disc.
Shut down the unit, wait ten seconds, and restart the unit.
Failed to work
with keys
Power surges or brown outs or other electrical phenomena.
Shut down the unit, wait ten seconds, and restart the unit.