Filter
Top Products
BOTTOM VIEW
CONTROL
DVI D-SUB
COMPONENT INPUT 1 COMPONENT INPUT 2 AV OUTPUT
AV INPUT
HEADPHONE RF SVHS
Connections (continued)
15
How to connect:
Connect the cable or antenna to the antenna input jack on the DTV receiver.
Connect the Video cable between the Y, Pb, Pr input jacks on the unit and Y, Pb, Pr output jacks on the DTV receiver
.
Connect the Audio cable between the AUDIO input jack on the unit and AUDIO output jacks on the DTV receiver.
Note:
In order to use the sound input for component video playback you will require a Stereo 9mm adapter.
To Watch DTV
1. Turn on your PDP TV, press SOURCE button on the remote
control.
2. Press VOL+/- to select H1 (YPbPr1) or H2 (YPbPr2).
3. Press ENTER to confirm.
4. Turn on your DTV receiver.
Audio
cable
Video
cable
Connect a DTV receiver
DTV Receiver
Rear of the DTV receiver
YCbCr1
source
A D H1 H2 C1 C2 AV TV
white (audio L)
red (audio R, Pr/Cr)
Green (Y)
Blue (Pb/Cb)