Filter
Top Products
Other Functions
SLEEP
You don’t have to remember to switch the set turn off before you go to sleep.
The sleep timer automatically switches the set to stand-by after the preset time elapses.
For selecting you desired number of minutes, press the SLEEP button several times or
Continuously. OFF will appear on the screen, followed by 10, 20, 30, 60, 90, 120, 150, and 180.
NOTE:
1. To view the remaining sleep time, press the SLEEP button once.
2. To cancel the sleep time, repeatedly press the SLEEP button until the
display SLEEP OFF appears.
3. When you switched the set turn off, the set released the preset sleep time.
RECALL
Press RECALL button on the remote control. The number of TV channel or the video mode
you are now viewing, will display on the screen.
SURROUND
You can select the special surround effect sound. Press SURROUND button, you may get
surround effect sound and will display SURROUND ON, on the screen. If you don’t want
this effect, press again SURROUND button then you may get normal sound and will display
SURROUND OFF.
APPENDIX A: Power Saver
This monitor has a built-in power management system called Power saver. This system saves energy by
switching your monitor into a low-power mode when it has not been used for a certain period of time. The
available modes are "On", "Stand-by", "Sleep" and "Deep Sleep". Power Saver operates with a VESA DPMS
compliant video card installed in your computer You use a software utility installed on your computer to set up
this feature. See below table for details.
Horizontal Sync
Vertical Sync
Video
Active
Active
Active
Power
Indicator
Green
30W (Max.)
Power
Consumption
Power-Saving Function mode (EPA / ENERGY 2000)
Standby Mode
Inactive
Active
Blanked
Amber
Less than 3W
Sleep Mode
Position A1
Active
Inactive
Blanked
Amber Blinking
(0.5 sec interval)
Less than 3W
NOTE: This monitor automatically returns to normal operation when horizontal and vertical sync return.
This occurs when you move the computer’s mouse or press a key on the keyboard.
Deep Sleep Mode
Position A2
Inactive
Inactive
Blanked
Amber Blinking
(1 sec interval)
Less than 3W
28
Normal
Operation
S:rate