Filter
Top Products
SOURCE
CH +
CH
-
VOL +
MENU
VOL
-
To enter into PC mode
Adjustments in PC mode
21
Repeatedly press AV button on the remote control or SOURCE
button on the control panel until the screen display PC, which
indicates that the set is in PC mode.
Please connect VGA input and be sure that there is VGA input
signal. The signal format should be one of the follows:
640 x 480 @60Hz
640 x 480 @75Hz
800 x 600 @60Hz
800 x 600 @75Hz
1024 x 768 @60Hz
1024 x 768 @75Hz
We recommend you to use 1024 x 768 @60Hz so that the set
can obtain the best picture.
When PC signal format changes or when you switch to PC
mode by AV button, the set corrects picture automatically
including frequency and phase to obtain the best display.
During the process of auto correction, all buttons on the
remote control and control panel do not work until this process
is finished.
When the set displays some signal formats that are
nonstandard and can not adjust by itself to the best displaying
status, now you can press AUTO CORRECT button to correct
the displaying again.
PC signal format
Use AUTO CORRECT button
PC