Palsonic TFTV515 Flat Panel Television User Manual


 
Installation (continued)
11
Connecting the Video/Audio equipment
1. Carefully check the terminals for position and type before making any connections.
2. Loose connectors will result in image or colour problems. Make sure that all connectors are securely inserted
into their terminals.
3. When connecting an external device, turn off the power to the main unit first tot prevent any possible damage.
You can connect the unit to a DVD or VCR to enjoy playback with high quality picture and sound.
Please refer to the instruction manual of the equipment to be connected.
Composite Video signal connection
Connect the composite video signal terminal on the TV to the output of AV equipment through composite cable.
If you select the video signal, please set the input signal source of LCD TV to AV mode.
Note: Composite video is the most common used signal, but the picture quality is not as high as S-video.
S-VIDEO Signal Connection
Connect the S-video terminal on the TV to the output of AV equipment using a S-video cable.
If you select S-video signal, please set the input signal source of LCD TV to SVIDEO mode.
Note:
S-Video is a signal format which transfers the colour and brightness of the picture with higher quality than a
Composite connection. The S-Video signal connection is recommended to produce the best picture.
Audio is shared between the AV and S-Video inputs.