Filter
Top Products
5
Warning:
Dispose of old batteries
promptly and properly. Do not burn or
bury them.
Caution:
If you do not plan to use the
TV with batteries for an extended peri-
od, remove the batteries. Batteries
can leak chemicals that can destroy
electronic parts.
To access the
EARPHONE
,
DC 6V IN
,
and
AV IN
jacks on the back of the TV,
use a flat-blade screwdriver to un-
screw the locking screw.
Remove the cover and connect the
adapter or earphone plug. Store the
cover when you are using the jacks
and securely replace it when the jacks
are not in use.
AC Power
Caution:
You must use a
Class 2 power source that
supplies 6 volts DC and deliv-
ers at least 1,000 mA. Its center tip
must be set to positive and its plug
must fit the TV's
DC 6V IN
jack. (We
recommend RadioShack Cat. No.
273-1680.) Using an adapter that
does not meet these specifications
could damage the TV or the adapter.
Set the adapter's voltage switch to 6V.
Plug the adapter's barrel plug into the
TV's
DC 6V IN
jack
. Then plug the other
end of the adapter into a standard AC
outlet.
Notes:
• Do not leave the adapter plugged
into the AC outlet or connected to
the TV when you are not using the
TV.
• Always unplug the adapter from
the AC outlet first.
• Internal batteries automatically
disconnect when you plug an
adapter into the
DC 6V IN
jack.
• The adapter might become warm
after extended periods of use.
!
16-185.fm Page 5 Saturday, May 8, 1999 2:30 PM